Skip to main content
Log in
Schneider Electric A9N1P16BIN — 1-Pole MCB (DIN Rail)

Schneider Electric A9N1P16BIN MCB, 1P 16A Curve B, 10 kA

MPNA9N1P16BIN
Active

Schneider Electric Acti9 XC60 miniature circuit-breaker, 1P, 16 A, curve B, 10 kA breaking capacity at 240 V AC, IS/IEC 60947-2.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

A9N1P16BIN — Identification
ParameterValue
Product nameXC60
Product / component typeMiniature circuit-breaker
Product rangeActi9
Device short namexC60
Poles description1P
Number of protected poles1
Device applicationDistribution
A9N1P16BIN — Electrical & Protection
ParameterValue
Rated current (In)16 A
Rated operational voltage (Ue)220...240 V AC 50/60 Hz 12...48 V DC 60 V DC
Tripping curve codeB
Magnetic tripping limit4 x In +/- 20 %
Breaking capacity (Icu / AIR)10 kA Icu at 220...240 V AC 50/60 Hz conforming to IS/IEC 60947-2 15 kA Icu at 12...48 V DC conforming to IS/IEC 60947-2 6 kA Icu at 60 V DC conforming to IS/IEC 60947-2
Network type (AC/DC)DC AC
Network frequency50/60 Hz
Overvoltage categoryIV
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
A9N1P16BIN — Mounting & Connection
ParameterValue
Terminal connections / wire rangeTunnel type terminals (bottom) 16 mm² flexible Tunnel type terminals (bottom) 25 mm² rigid Biconnect (bottom)
Mounting support35 mm DIN rail
Mounting modeClip-on
Width18 mm
Height85 mm
Depth77.5 mm
Tightening torque (by circuit)2 N.m
A9N1P16BIN — Environmental
ParameterValue
Operating ambient temperature-30...70 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20
A9N1P16BIN — Approvals
ParameterValue
Conformity standardsIS/IEC 60947-2
A9N1P16BIN — Electrical
ParameterValue
[Ui] rated insulation voltage500 V AC 50/60 Hz conforming to IS/IEC 60947-2
[Uimp] rated impulse withstand voltage4 kV conforming to IS/IEC 60947-2

Product details

The A9N1P16BIN is a 1-pole miniature circuit-breaker carrying a 16 A rated current and a B tripping curve. Breaking capacity hits 10 kA Icu at 240 V AC (50/60 Hz) per IS/IEC 60947-2, which certifies it for fault interruption up to that level without upstream cascading. On DC circuits it handles 15 kA at 12-48 V DC and 6 kA at 60 V DC. The thermal-magnetic trip unit covers both overload and short-circuit protection in a single pole.

The A9N1P16BIN carries a current lifecycle stage from Schneider Electric within the Acti9 XC60 range.

Deployment context

The 18 mm width per pole packs two units into a 36 mm space — standard for a 1P breaker in a multi-way distribution board. The white housing with ON/OFF toggle indication gives immediate visual state. Separate earth-leakage protection block (not included) can be added downstream if RCD protection is required.

Frequently asked questions

Where can I buy A9N1P16BIN?

Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What is the breaking capacity of A9N1P16BIN?

10 kA Icu at 220-240 V AC (50/60 Hz) per IS/IEC 60947-2, plus 15 kA at 12-48 V DC and 6 kA at 60 V DC.

What does the B curve mean on this MCB?

Magnetic tripping occurs at 4 x In (64 A, +/-20 %), suited for resistive and general-purpose loads with low inrush current.

What compliance documentation is available for A9N1P16BIN?

Certified to IS/IEC 60947-2 with tropicalisation per IEC 60068-1, pollution degree 3, and overvoltage category IV. Suitability for isolation confirmed per the same standard.

MPN
A9N1P16BIN