Skip to main content
Log in
Schneider Electric A9N1P32DIN — 1-Pole MCB (DIN Rail)

Schneider Electric A9N1P32DIN Acti9 MCB, 32 A, D Curve, 1P

MPNA9N1P32DIN
Active

Schneider Electric Acti9 xC60 miniature circuit breaker, A9N1P32DIN, 1P, 32 A, D curve, 10 kA Icu at 240 V AC, clip-on 35 mm DIN rail, IP20.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9N1P32DIN — Identification
ParameterValue
Product nameXC60
Product / component typeMiniature circuit-breaker
Product rangeActi9
Device short namexC60
Poles description1P
Number of protected poles1
Device applicationDistribution
A9N1P32DIN — Electrical & Protection
ParameterValue
Rated current (In)32 A
Rated operational voltage (Ue)220...240 V AC 50/60 Hz 12...48 V DC 60 V DC
Tripping curve codeD
Magnetic tripping limit12 x In +/- 20 %
Breaking capacity (Icu / AIR)10 kA Icu at 220...240 V AC 50/60 Hz conforming to IS/IEC 60947-2 15 kA Icu at 12...48 V DC conforming to IS/IEC 60947-2 6 kA Icu at 60 V DC conforming to IS/IEC 60947-2
Network type (AC/DC)DC AC
Network frequency50/60 Hz
Overvoltage categoryIV
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
A9N1P32DIN — Mounting & Connection
ParameterValue
Terminal connections / wire rangeBiconnect (bottom) Tunnel type terminals (bottom) 25 mm² flexible Tunnel type terminals (bottom) 35 mm² rigid
Mounting support35 mm DIN rail
Mounting modeClip-on
Width18 mm
Height85 mm
Depth77.5 mm
Tightening torque (by circuit)3.5 N.m
A9N1P32DIN — Environmental
ParameterValue
Operating ambient temperature-30...70 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20
A9N1P32DIN — Approvals
ParameterValue
Conformity standardsIS/IEC 60947-2
A9N1P32DIN — Electrical
ParameterValue
[Ui] rated insulation voltage500 V AC 50/60 Hz conforming to IS/IEC 60947-2
[Uimp] rated impulse withstand voltage4 kV conforming to IS/IEC 60947-2

Product details

What the D curve and 32 A rating mean for your panel

On a 32 A breaker, that magnetic threshold sits between roughly 307 A and 461 A — well above the starting surge of a 7.5 kW motor on a 400 V line.

Breaking capacity and standard compliance

Breaking capacity is 10 kA Icu at 220…240 V AC 50/60 Hz, 15 kA Icu at 12…48 V DC, and 6 kA Icu at 60 V DC, all per IS/IEC 60947-2.

Integration and terminal detail

The biconnect bottom terminal allows daisy-chaining without additional links. Wire stripping length is 13 mm for both top and bottom connections. The white housing carries an ON/OFF toggle indicator and is tropicalised per IEC 60068-1 (2 levels).

Frequently asked questions

Where can I buy the A9N1P32DIN?

The A9N1P32DIN is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm commercial response.

What is the breaking capacity of the A9N1P32DIN?

10 kA Icu at 220…240 V AC 50/60 Hz, 15 kA Icu at 12…48 V DC, and 6 kA Icu at 60 V DC, all per IS/IEC 60947-2.

What does the D curve mean on this breaker?

The D curve trips magnetically at 12 x In (±20 %), so on a 32 A breaker the magnetic trip threshold is between about 307 A and 461 A. This suits loads with high inrush current such as motors, transformers, and welding equipment.

MPN
A9N1P32DIN