Schneider Electric Acti9 xC60 miniature circuit breaker, 1-pole, 40 A, C-curve, 10 kA Icu at 240 V AC, clip-on for 35 mm DIN rail.
| Parameter | Value |
|---|---|
| Product name | XC60 |
| Product / component type | Miniature circuit-breaker |
| Product range | Acti9 |
| Device short name | xC60 |
| Poles description | 1P |
| Number of protected poles | 1 |
| Device application | Distribution |
| Parameter | Value |
|---|---|
| Rated current (In) | 40 A |
| Rated operational voltage (Ue) | 220...240 V AC 50/60 Hz 12...48 V DC 60 V DC |
| Tripping curve code | C |
| Magnetic tripping limit | 8 x In +/- 20 % |
| Breaking capacity (Icu / AIR) | 10 kA Icu at 220...240 V AC 50/60 Hz conforming to IS/IEC 60947-2 15 kA Icu at 12...48 V DC conforming to IS/IEC 60947-2 6 kA Icu at 60 V DC conforming to IS/IEC 60947-2 |
| Network type (AC/DC) | DC AC |
| Network frequency | 50/60 Hz |
| Overvoltage category | IV |
| Trip unit technology | Thermal-magnetic |
| Control / actuation type | Toggle |
| Mechanical durability (cycles) | 20000 cycles |
| Parameter | Value |
|---|---|
| Terminal connections / wire range | Biconnect (bottom) Tunnel type terminals (bottom) 25 mm² flexible Tunnel type terminals (bottom) 35 mm² rigid |
| Mounting support | 35 mm DIN rail |
| Mounting mode | Clip-on |
| Width | 18 mm |
| Height | 85 mm |
| Depth | 77.5 mm |
| Tightening torque (by circuit) | 3.5 N.m |
| Parameter | Value |
|---|---|
| Operating ambient temperature | -30...70 °C |
| Storage ambient temperature | -40...85 °C |
| IP degree of protection | IP20 |
| Parameter | Value |
|---|---|
| Conformity standards | IS/IEC 60947-2 |
| Parameter | Value |
|---|---|
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz conforming to IS/IEC 60947-2 |
| [Uimp] rated impulse withstand voltage | 4 kV conforming to IS/IEC 60947-2 |
The Schneider Electric A9N1P40CIN is a 40 A, 1-pole miniature circuit breaker from the Acti9 xC60 range, built to IS/IEC 60947-2. At 12–48 V DC it delivers 15 kA Icu, so it works in DC sub-distribution or control power feeds too.
Clip-on mounting to a 35 mm DIN rail, 18 mm wide (2 x 9 mm pitches), 85 mm tall, 77.5 mm deep. That 77.5 mm depth means it sits flush with most standard distribution boards — no extra clearance needed behind the rail. Strip length 13 mm, tighten to 3.5 N·m.
Submit an RFQ through this listing. Pricing and stock are confirmed at quote time through our independent distribution network — no online price or live count is displayed.
77.5 mm, which fits standard distribution board depths without extra rear clearance.
It conforms to IS/IEC 60947-2, with pollution degree 3, overvoltage category IV, and suitability for isolation per that standard.
No related articles