Skip to main content
Log in
Schneider Electric A9N21369 — 1-Pole MCB (DIN Rail)

Schneider Electric A9N21369 DT40N MCB, 32 A C-Curve 1P+N, 6

MPNA9N21369
Obsolete

Schneider Electric ProDis DT40N, miniature circuit breaker, 1P+N, 32 A, C-curve, 6 kA Icn / 10 kA Icu, clip-on DIN rail, white.

Schneider Electric A9N21369 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9N21369 — Identification
ParameterValue
Product nameDT40
Product / component typeMiniature circuit-breaker
Product rangeProdis
Device short nameDT40N
Poles description1P + N
Number of protected poles1
Device applicationDistribution
A9N21369 — Electrical & Protection
ParameterValue
Rated current (In)32 A
Rated operational voltage (Ue)230 V AC 50 Hz between phase and neutral
Tripping curve codeC
Magnetic tripping limit5...10 x In
Breaking capacity (Icu / AIR)6000 A Icn at 230 V AC 50 Hz conforming to EN/IEC 60898-1 10 kA Icu at 230...240 V AC 50 Hz conforming to IEC 60947-2
Network type (AC/DC)AC
Network frequency50 Hz
Overvoltage categoryIV
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
A9N21369 — Mounting & Connection
ParameterValue
Terminal connections / wire rangeTunnel type terminals downstream 0.33...10 mm² flexible Tunnel type terminals downstream 0.75...16 mm² rigid Tunnel type terminals upstream 0.33...10 mm² flexible Tunnel type terminals upstream 0.75...16 mm² rigid
Mounting supportDIN rail
Mounting modeClip-on
Width18 mm
Height81 mm
Depth78 mm
Tightening torque (by circuit)2 N.m
A9N21369 — Environmental
ParameterValue
Operating ambient temperature-25...70 °C
Storage ambient temperature-40...70 °C
IP degree of protectionIP20 conforming to IEC 60529
A9N21369 — Approvals
ParameterValue
Conformity standardsEN/IEC 60898-1 EN/IEC 60947-2
A9N21369 — Electrical
ParameterValue
[Ui] rated insulation voltage400 V AC 50 Hz
[Uimp] rated impulse withstand voltage4 kV conforming to IEC 60947-2

Product details

The Schneider Electric A9N21369 DT40N is a 32 A miniature circuit breaker with a C-curve (magnetic trip 5–10 × In), 1P+N poles, and a dual-rated breaking capacity: 6000 A Icn at 230 V AC per EN/IEC 60898-1 for residential/commercial distribution, and 10 kA Icu at 230–240 V AC per IEC 60947-2 for industrial panel duty. The 1P+N configuration protects the live pole only; the neutral pole is switched but not protected, so it fits single-phase sub-circuits where neutral isolation is needed but overcurrent protection on the neutral is not required.

Clip-on mounting to DIN rail (EN 60715) with a 2-pitch (9 mm) footprint — 18 mm wide per pole, so the 1P+N unit occupies 2 modules. ON/OFF local signalling via toggle gives immediate visual status during commissioning or fault tracing.

Frequently asked questions

What is the breaking capacity of A9N21369?

The A9N21369 has a dual breaking capacity: 6000 A Icn at 230 V AC per EN/IEC 60898-1 for residential/commercial distribution, and 10 kA Icu at 230–240 V AC per IEC 60947-2 for industrial panel applications.

What standards does the A9N21369 comply with?

It complies with EN/IEC 60898-1 and EN/IEC 60947-2, covering both the residential MCB standard and the industrial circuit-breaker standard. It also carries NF quality labelling and tropicalisation per IEC 60068-1 (class 2).

Where can I buy A9N21369?

The A9N21369 is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm commitment on price and lead time.

MPN
A9N21369