Skip to main content
Log in
Schneider Electric A9N2P02DGN — 2-Pole MCB (DIN Rail)

Schneider Electric A9N2P02DGN Acti9 xC60 MCB, 2A D Curve, 10

MPNA9N2P02DGN
Active

Schneider Electric Acti9 xC60 miniature circuit breaker, A9N2P02DGN, 2 A rated current, D curve, 10 kA breaking capacity, 2-pole, 36 mm width, clip-on DIN rail mount.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9N2P02DGN — Identification
ParameterValue
Product nameXC60
Product rangeActi9
Series / familyActi9
Device short namexC60
Product / component typeMiniature circuit-breaker
Device applicationDistribution
A9N2P02DGN — Electrical
ParameterValue
Rated current [In]2 A
Number of protected poles2
Pole configuration2P
Rated operational voltage [Ue]220...240 V AC 50/60 Hz 380...415 V AC 50/60 Hz
Network type (AC/DC)AC
Network frequency50/60 Hz
A9N2P02DGN — Protection
ParameterValue
Tripping curve codeD
Magnetic tripping limit10...14 x In
Breaking capacity (Icu)10000 A Icn at 240 V AC 50/60 Hz conforming to IS/IEC 60898-1 10000 A Icn at 415 V AC 50/60 Hz conforming to IS/IEC 60898-1
Energy limitation class3 conforming to IS/IEC 60898-1
Overvoltage categoryIV
Trip unit technologyThermal-magnetic
Earth-leakage protectionSeparate block
Operating / control typeToggle
Mechanical durability (cycles)20000 cycles
A9N2P02DGN — Mechanical
ParameterValue
9 mm pitches4
Width36 mm
Height85 mm
Depth77.5 mm
Mounting support35 mm DIN rail
Mounting modeClip-on
Terminal connectionsTunnel type terminals (bottom) 16 mm² flexible Tunnel type terminals (bottom) 25 mm² rigid Biconnect (bottom)
Terminal tightening torque2 N.m
Comb busbar / distribution block compatibilityTop: YES
Local signalling / indicationON/OFF indication
Contact position indicatorYes
A9N2P02DGN — Environmental
ParameterValue
Operating temperature range-30...70 °C
Storage temperature range-40...85 °C
Relative humidity95 % at 55 °C
A9N2P02DGN — Approvals
ParameterValue
Standards / complianceIS/IEC 60898-1

Product details

It's a 2-pole unit rated for 10 kA breaking capacity at 240 V AC and 415 V AC, compliant with IS/IEC 60898-1.

At 36 mm wide (4 x 9 mm pitches) and 85 mm tall, it occupies two adjacent pole positions in a distribution board. Depth is 77.5 mm — check your enclosure depth if using a shallow gland plate or door-mounting. Wire strip length is 13 mm for both top and bottom connections.

For a 2 A circuit, that's substantial headroom; you'd typically see fault levels well below that in a final sub-distribution board. The thermal-magnetic trip unit gives you overload protection (thermal bimetal) and short-circuit protection (magnetic coil). IP20 finger protection on the front; the terminals are protected by the enclosure.

Frequently asked questions

Where can I buy the A9N2P02DGN?

This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What is the closest alternative to the A9N2P02DGN in the Acti9 family?

Within the Acti9 xC60 range, the closest alternative would be a 2 A D-curve MCB from the same series — the key difference is the order code suffix. The A9N2P02DGN is the standard 2-pole variant; a 1-pole or 4-pole version would change the pole count. No pin-compatible drop-in exists with different ratings; the D curve and 2 A rating define the trip coordination.

What compliance documentation does Schneider provide for the A9N2P02DGN?

The breaker is certified to IS/IEC 60898-1. It carries tropicalisation treatment per IEC 60068-1 (class 2). For RoHS, REACH, and specific UL documentation, Schneider's standard compliance declarations for the Acti9 range apply — these are available on request with the RFQ.

MPN
A9N2P02DGN