Skip to main content
Log in
Schneider Electric A9N2P10CIN — 2-Pole MCB (DIN Rail)

Schneider Electric A9N2P10CIN Acti9 xC60 MCB, 10 A, C-Curve,

MPNA9N2P10CIN
Active

Schneider Electric Acti9 xC60 miniature circuit-breaker, A9N2P10CIN, 2-pole, 10 A rated current, C-curve, 10 kA breaking capacity at 415 V AC, 35 mm DIN rail clip-on.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9N2P10CIN — Identification
ParameterValue
Product nameXC60
Product rangeActi9
Series / familyActi9
Device short namexC60
Product / component typeMiniature circuit-breaker
Device applicationDistribution
A9N2P10CIN — Electrical
ParameterValue
Rated current [In]10 A
Number of protected poles2
Pole configuration2P
Rated operational voltage [Ue]220...240 V AC 50/60 Hz 380...415 V AC 50/60 Hz 100...125 V DC
Network type (AC/DC)DC AC
Network frequency50/60 Hz
A9N2P10CIN — Protection
ParameterValue
Tripping curve codeC
Magnetic tripping limit8 x In +/- 20 %
Breaking capacity (Icu)10 kA Inc at 380...415 V AC 50/60 Hz conforming to IS/IEC 60947-2 6 kA Icu at 100...125 V DC conforming to IS/IEC 60947-2
Rated service breaking capacity [Ics]6 kA conforming to IS/IEC 60947-2 - 100...125 V DC 7.5 kA conforming to IS/IEC 60947-2 - 380...415 V AC 50/60 Hz
Energy limitation class3 conforming to IS/IEC 60947-2
Suitable for isolationYes conforming to IS/IEC 60947-2
Overvoltage categoryIV
Trip unit technologyThermal-magnetic
Earth-leakage protectionSeparate block
Operating / control typeToggle
Mechanical durability (cycles)20000 cycles
A9N2P10CIN — Mechanical
ParameterValue
9 mm pitches4
Width36 mm
Height85 mm
Depth77.5 mm
Mounting support35 mm DIN rail
Mounting modeClip-on
Terminal connectionsTunnel type terminals (bottom) 16 mm² flexible Tunnel type terminals (bottom) 25 mm² rigid Biconnect (bottom)
Terminal tightening torque2 N.m
Comb busbar / distribution block compatibilityTop: YES
Local signalling / indicationON/OFF indication
Contact position indicatorYes
A9N2P10CIN — Environmental
ParameterValue
Operating temperature range-30...70 °C
Storage temperature range-40...85 °C
Relative humidity95 % at 55 °C
A9N2P10CIN — Approvals
ParameterValue
Standards / complianceIS/IEC 60947-2

Product details

MCB for distribution boards — 10 A, C-curve, 2-pole

The Schneider Electric A9N2P10CIN is a 2-pole miniature circuit-breaker from the Acti9 xC60 range, rated at 10 A with a C-curve magnetic tripping characteristic (8 x In +/- 20 %). The breaking capacity is 10 kA Icn at 380...415 V AC 50/60 Hz per IS/IEC 60947-2, and 6 kA Icu at 100...125 V DC per the same standard. This places it in Category A (no intentional short-time delay) for distribution applications.

Specification and compliance

The C-curve is suited to moderate inrush loads such as small motors, transformers, and lighting banks. The device is suitable for isolation per IS/IEC 60947-2, meaning it can be used as a local disconnection point for maintenance. Electrical and mechanical durability are both rated at 20,000 cycles.

The 2-pole body takes 36 mm of rail space (4 x 9 mm pitches). Wire stripping length is 13 mm for top or bottom connection. The IP20 finger-safe front allows panel mounting without additional shrouding. The toggle provides local ON/OFF indication.

Frequently asked questions

Where can I buy A9N2P10CIN?

The A9N2P10CIN is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at the time of quote.

What is the breaking capacity of A9N2P10CIN?

The breaking capacity is 10 kA Icn at 380...415 V AC 50/60 Hz per IS/IEC 60947-2, and 6 kA Icu at 100...125 V DC per the same standard.

What compliance documentation does Schneider provide for A9N2P10CIN?

The manufacturer provides compliance documentation covering IS/IEC 60947-2, IEC 60068-1 tropicalisation (class 2), and associated test certificates. The product carries Limitation class 3 per IS/IEC 60947-2.

MPN
A9N2P10CIN