Skip to main content
Log in
Schneider Electric A9N2P20BGN — 2-Pole MCB (DIN Rail)

Schneider Electric A9N2P20BGN Acti9 xC60 MCB, 20A B Curve 2P

MPNA9N2P20BGN
Active

Schneider Electric Acti9 xC60, miniature circuit-breaker, 20 A, B curve, 2P, 10 kA Icn at 240 V AC, clip-on 35 mm DIN rail.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9N2P20BGN — Identification
ParameterValue
Product nameXC60
Product rangeActi9
Series / familyActi9
Device short namexC60
Product / component typeMiniature circuit-breaker
Device applicationDistribution
A9N2P20BGN — Electrical
ParameterValue
Rated current [In]20 A
Number of protected poles2
Pole configuration2P
Rated operational voltage [Ue]220...240 V AC 50/60 Hz 380...415 V AC 50/60 Hz
Network type (AC/DC)AC
Network frequency50/60 Hz
A9N2P20BGN — Protection
ParameterValue
Tripping curve codeB
Magnetic tripping limit3...5 x In
Breaking capacity (Icu)10000 A Icn at 240 V AC 50/60 Hz conforming to IS/IEC 60898-1 10000 A Icn at 415 V AC 50/60 Hz conforming to IS/IEC 60898-1
Energy limitation class3 conforming to IS/IEC 60898-1
Overvoltage categoryIV
Trip unit technologyThermal-magnetic
Earth-leakage protectionSeparate block
Operating / control typeToggle
Mechanical durability (cycles)20000 cycles
A9N2P20BGN — Mechanical
ParameterValue
9 mm pitches4
Width36 mm
Height85 mm
Depth77.5 mm
Mounting support35 mm DIN rail
Mounting modeClip-on
Terminal connectionsTunnel type terminals (bottom) 16 mm² flexible Tunnel type terminals (bottom) 25 mm² rigid Biconnect (bottom)
Terminal tightening torque2 N.m
Comb busbar / distribution block compatibilityTop: YES
Local signalling / indicationON/OFF indication
Contact position indicatorYes
A9N2P20BGN — Environmental
ParameterValue
Operating temperature range-30...70 °C
Storage temperature range-40...85 °C
Relative humidity95 % at 55 °C
A9N2P20BGN — Approvals
ParameterValue
Standards / complianceIS/IEC 60898-1

Product details

The Schneider Electric A9N2P20BGN is an Acti9 xC60 miniature circuit-breaker rated 20 A, B curve, 2 poles. It clips onto a 35 mm DIN rail and breaks up to 10 kA at 240 V AC or 415 V AC per IS/IEC 60898-1.

At 415 V AC it still holds 10 kA, which covers three-phase distribution panels where line-to-line faults are the worst case. The thermal-magnetic trip unit handles overloads thermally and short circuits magnetically — no electronics to drift or fail in a hot panel. Overvoltage category IV confirms it can be installed at the service entrance, not just downstream sub-panels.

Deployment context

Clip-on mounting on 35 mm DIN rail means it snaps into any standard distribution board or industrial enclosure. At 36 mm wide (4 x 9 mm pitches) for 2 poles, it fits neatly in a crowded row. The toggle gives local ON/OFF indication with a visible contact position indicator — no guessing whether the breaker is open.

Frequently asked questions

What is the breaking capacity of A9N2P20BGN?

It has a breaking capacity of 10 kA Icn at both 240 V AC and 415 V AC, 50/60 Hz, conforming to IS/IEC 60898-1.

What does the B curve mean on this MCB?

The B curve means the magnetic trip operates at 3 to 5 times the rated current (60 to 100 A for this 20 A breaker). It is suited for resistive and lighting loads with low inrush, not for motor circuits.

Where can I buy A9N2P20BGN and get current pricing?

This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock or price figures are published here.

MPN
A9N2P20BGN