Skip to main content
Log in
Schneider Electric A9N2P25CGN — 2-Pole MCB (DIN Rail)

Schneider Electric A9N2P25CGN Acti9 xC60 MCB, 25 A, C-Curve,

MPNA9N2P25CGN
Active

Schneider Electric Acti9 xC60, miniature circuit breaker, A9N2P25CGN, 2P, 25 A, C-curve, 10 kA breaking capacity at 240/415 V AC, clip-on 35 mm DIN rail.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9N2P25CGN — Identification
ParameterValue
Product nameXC60
Product rangeActi9
Series / familyActi9
Device short namexC60
Product / component typeMiniature circuit-breaker
Device applicationDistribution
A9N2P25CGN — Electrical
ParameterValue
Rated current [In]25 A
Number of protected poles2
Pole configuration2P
Rated operational voltage [Ue]220...240 V AC 50/60 Hz 380...415 V AC 50/60 Hz
Network type (AC/DC)AC
Network frequency50/60 Hz
A9N2P25CGN — Protection
ParameterValue
Tripping curve codeC
Magnetic tripping limit5...10 x In
Breaking capacity (Icu)10000 A Icn at 240 V AC 50/60 Hz conforming to IS/IEC 60898-1 10000 A Icn at 415 V AC 50/60 Hz conforming to IS/IEC 60898-1
Energy limitation class3 conforming to IS/IEC 60898-1
Overvoltage categoryIV
Trip unit technologyThermal-magnetic
Earth-leakage protectionSeparate block
Operating / control typeToggle
Mechanical durability (cycles)20000 cycles
A9N2P25CGN — Mechanical
ParameterValue
9 mm pitches4
Width36 mm
Height85 mm
Depth77.5 mm
Mounting support35 mm DIN rail
Mounting modeClip-on
Terminal connectionsTunnel type terminals (bottom) 16 mm² flexible Tunnel type terminals (bottom) 25 mm² rigid Biconnect (bottom)
Terminal tightening torque2 N.m
Comb busbar / distribution block compatibilityTop: YES
Local signalling / indicationON/OFF indication
Contact position indicatorYes
A9N2P25CGN — Environmental
ParameterValue
Operating temperature range-30...70 °C
Storage temperature range-40...85 °C
Relative humidity95 % at 55 °C
A9N2P25CGN — Approvals
ParameterValue
Standards / complianceIS/IEC 60898-1

Product details

The Schneider Electric A9N2P25CGN is a miniature circuit breaker from the Acti9 xC60 range, a 2-pole (2P) unit rated at 25 A with a C-curve trip characteristic. It clips onto a standard 35 mm DIN rail, making it a direct fit for distribution boards and sub-panels needing branch-circuit protection on AC networks at 50/60 Hz. The 25 A rating and 2-pole configuration suit single-phase or split-phase final subcircuits.

Breaking capacity and standards compliance

Breaking capacity is 10 kA Icn at both 240 V and 415 V AC, certified to IS/IEC 60898-1. That 10 kA rating at 415 V is the figure that governs fault clearance in a 400 V three-phase panel — it tells you the breaker can safely interrupt a bolted fault up to that level without welding contacts or rupturing the case.

Mounting and termination details

Clip-on mounting to 35 mm DIN rail, 4 module pitches wide (36 mm per pole). The toggle provides local ON/OFF indication with a visible contact position indicator.

Frequently asked questions

Where can I buy the A9N2P25CGN?

This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What is the breaking capacity of the A9N2P25CGN?

10 kA Icn at both 240 V and 415 V AC, 50/60 Hz, certified to IS/IEC 60898-1. That is the same rating at both voltage levels, which is unusual — most MCBs derate at higher voltage.

What standards does this MCB comply with?

It complies with IS/IEC 60898-1, the Indian and international standard for AC miniature circuit breakers up to 125 A. Pollution degree 3 and overvoltage category IV are also specified.

MPN
A9N2P25CGN