BOM / RFQ

Schneider Electric A9N2P40CGN — 2-Pole MCB (DIN Rail)

Schneider Electric A9N2P40CGN Acti9 xC60 MCB, 40 A, C Curve,

MPNA9N2P40CGN

Active

Schneider Electric Acti9 xC60 miniature circuit breaker, A9N2P40CGN, 40 A rated, C curve, 2-pole, 10 kA breaking capacity, clip-on 35 mm DIN rail.

Add to RFQ

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9N2P40CGN — Identification
Parameter	Value
Product name	XC60
Product range	Acti9
Series / family	Acti9
Device short name	xC60
Product / component type	Miniature circuit-breaker
Device application	Distribution

A9N2P40CGN — Electrical
Parameter	Value
Rated current [In]	40 A
Number of protected poles	2
Pole configuration	2P
Rated operational voltage [Ue]	220...240 V AC 50/60 Hz 380...415 V AC 50/60 Hz
Network type (AC/DC)	AC
Network frequency	50/60 Hz

A9N2P40CGN — Protection
Parameter	Value
Tripping curve code	C
Magnetic tripping limit	5...10 x In
Breaking capacity (Icu)	10000 A Icn at 240 V AC 50/60 Hz conforming to IS/IEC 60898-1 10000 A Icn at 415 V AC 50/60 Hz conforming to IS/IEC 60898-1
Energy limitation class	3 conforming to IS/IEC 60898-1
Overvoltage category	IV
Trip unit technology	Thermal-magnetic
Earth-leakage protection	Separate block
Operating / control type	Toggle
Mechanical durability (cycles)	20000 cycles

A9N2P40CGN — Mechanical
Parameter	Value
9 mm pitches	4
Width	36 mm
Height	85 mm
Depth	77.5 mm
Mounting support	35 mm DIN rail
Mounting mode	Clip-on
Terminal connections	Biconnect (bottom) Tunnel type terminals (bottom) 25 mm² flexible Tunnel type terminals (bottom) 35 mm² rigid
Terminal tightening torque	3.5 N.m
Comb busbar / distribution block compatibility	Top: YES
Local signalling / indication	ON/OFF indication
Contact position indicator	Yes

A9N2P40CGN — Environmental
Parameter	Value
Operating temperature range	-30...70 °C
Storage temperature range	-40...85 °C
Relative humidity	95 % at 55 °C

A9N2P40CGN — Approvals
Parameter	Value
Standards / compliance	IS/IEC 60898-1

Product details

The Schneider Electric A9N2P40CGN is an Acti9 xC60 miniature circuit breaker rated 40 A, C curve, 2-pole, with a breaking capacity of 10 kA at both 240 V and 415 V AC per IS/IEC 60898-1.

The 10 kA Icn at 415 V AC matches the fault level of most commercial sub-distribution boards in IEC 60898-1 territories. Limitation class 3 means it restricts let-through energy enough to protect downstream wiring and terminals without cascading failure.

Installation notes

Tightening torque 3.5 N·m. The biconnect bottom terminal allows daisy-chaining without an extra busbar. IP20 finger-safe protection — fine inside an enclosure, not for wet locations.