Skip to main content
Log in
Schneider Electric A9P54613 — 1-Pole MCB (DIN Rail)

Schneider Electric A9P54613 Acti9 iC40N MCB, 13 A C-Curve 1P

MPNA9P54613
Active

Schneider Electric Acti9 iC40N miniature circuit-breaker, 1P+N, 13 A rated, C-curve, 10 kA breaking capacity, clip-on DIN rail mount.

Schneider Electric A9P54613 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9P54613 — Identification
ParameterValue
Product nameActi9 iC40
Product / component typeMiniature circuit-breaker
Product rangeActi9
Device short nameiC40N
Poles description1P + N
Number of protected poles1
Device applicationDistribution
A9P54613 — Electrical & Protection
ParameterValue
Rated current (In)13 A
Rated operational voltage (Ue)230 V AC 50/60 Hz
Tripping curve codeC
Magnetic tripping limit5...10 x In conforming to EN/IEC 60898-1 8 x In +/- 20 % conforming to EN/IEC 60947-2
Breaking capacity (Icu / AIR)10 kA Icu at 230 V AC 50/60 Hz conforming to EN/IEC 60947-2 6000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1
Network type (AC/DC)AC
Network frequency50/60 Hz
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
A9P54613 — Mounting & Connection
ParameterValue
Terminal connections / wire rangeTunnel type terminals top or bottom 1...10 mm² flexible Tunnel type terminals top or bottom 1...16 mm² rigid
Mounting supportDIN rail
Mounting modeClip-on
Width18 mm
Height85 mm
Depth74 mm
Tightening torque (by circuit)2 N.m top or bottom
A9P54613 — Environmental
ParameterValue
Operating ambient temperature-25...70 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
A9P54613 — Approvals
ParameterValue
Conformity standardsEN/IEC 60898-1 EN/IEC 60947-2
A9P54613 — Electrical
ParameterValue
[Ui] rated insulation voltage400 V AC 50/60 Hz conforming to EN/IEC 60947-2
[Uimp] rated impulse withstand voltage4 kV conforming to EN/IEC 60947-2

Product details

The Schneider Electric A9P54613 is an Acti9 iC40N miniature circuit-breaker (MCB) rated 13 A with a C-curve trip characteristic, 1P+N poles, and a breaking capacity of 10 kA Icu at 230 V AC per IEC 60947-2 (6 kA Icn per IEC 60898-1).

The 6 kA Icn per IEC 60898-1 is the domestic standard rating; the higher IEC 60947-2 figure is what an industrial panel spec usually references.

IP20 body, IP40 in a modular enclosure — fine for dry indoor panels, not for washdown environments.

MPN
A9P54613