Skip to main content
Log in
Schneider Electric A9P62710 — Circuit Breaker Accessories

Schneider Electric A9P62710 Acti9 iC40 MCB, D Curve, 10 A, 3

MPNA9P62710
Active

Schneider Electric Acti9 iC40, miniature circuit breaker, 10 A, D curve, 3P+N, 4.5 kA Icn / 6 kA Icu, clip-on DIN rail.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

A9P62710 — Identification
ParameterValue
Product / component typeMiniature circuit-breaker
Product nameActi9 iC40
Product rangeActi9
Device applicationDistribution
A9P62710 — Electrical
ParameterValue
Network type (AC/DC)AC
Rated current [In]10 A
Rated operational voltage [Ue]400 V AC 50/60 Hz
Rated insulation voltage [Ui]440 V AC 50/60 Hz conforming to EN/IEC 60947-2
Rated impulse withstand voltage [Uimp]4 kV conforming to EN/IEC 60947-2
Network frequency50/60 Hz
Poles description3P + N
Magnetic tripping limit10...14 x In conforming to EN/IEC 60898-1 12 x In +/- 20 % conforming to EN/IEC 60947-2
A9P62710 — Protection & Performance
ParameterValue
Breaking capacity4500 A Icn at 400 V AC 50/60 Hz conforming to EN/IEC 60898-1 6 kA Icu at 400 V AC 50/60 Hz conforming to EN/IEC 60947-2
Rated service breaking capacity [Ics]4500 A 100 % x Icn at 400 V AC 50/60 Hz conforming to EN/IEC 60898-1 4.5 kA 75 % x Icu at 400 V AC 50/60 Hz conforming to EN/IEC 60947-2
Trip unit technologyThermal-magnetic
Earth-leakage protectionSeparate block
Suitability for isolationYes conforming to EN/IEC 60947-2
Mechanical durability20000 cycles
Electrical durability20000 cycles
Local signallingON/OFF indication Trip indicator
Contact position indicatorYes
A9P62710 — Mechanical
ParameterValue
Connections / terminalsTunnel type terminals top or bottom 1...10 mm² flexible Tunnel type terminals top or bottom 1...16 mm² rigid
Device short nameiC40
Control typeToggle
Mounting modeClip-on
Mounting supportDIN rail
Usable 9 mm pitches6
Width54 mm
Height85 mm
Depth74 mm
ColourWhite
A9P62710 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3 conforming to EN/IEC 60947-2
Operating ambient air temperature-25...70 °C
Storage ambient air temperature-40...85 °C
A9P62710 — Approvals
ParameterValue
StandardsEN/IEC 60898-1 EN/IEC 60947-2
A9P62710 — Specifications
ParameterValue
Curve codeD
Number of protected poles3

Product details

The Schneider Electric A9P62710 is an Acti9 iC40 miniature circuit breaker rated at 10 A with a D curve, configured 3P+N. Breaking capacity is 4.5 kA Icn per EN/IEC 60898-1 and 6 kA Icu per EN/IEC 60947-2 at 400 V AC — dual-rated so it fits both residential distribution boards (60898-1) and industrial panel schedules (60947-2) without a separate derating calculation.

D-curve trip behaviour

The D curve's magnetic trip fires between 10 and 14 times In per EN/IEC 60898-1, and at 12 x In ±20 % per EN/IEC 60947-2. That high inrush tolerance is sized for motor circuits, transformer primaries, and welding equipment — loads that draw a short-duration surge well above running current without nuisance tripping.

Tightening torque 2 N·m top or bottom. Wire strip length 14 mm. IP20 finger-safe on the front; IP40 inside a modular enclosure. Padlocking device compatible for lockout/tagout.

Certified to EN/IEC 60898-1 and EN/IEC 60947-2. Pollution degree 3 per 60947-2. Suitability for isolation marked. Operating altitude 2000 m, relative humidity 95 % at 55 °C. Earth-leakage protection via separate block (not integral).

Frequently asked questions

What is the breaking capacity of A9P62710?

4.5 kA Icn per EN/IEC 60898-1 and 6 kA Icu per EN/IEC 60947-2, both at 400 V AC 50/60 Hz.

Where can I buy A9P62710 and how is it quoted?

Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit a request with your target quantity.

What is the closest alternative to A9P62710 in the Acti9 family?

Within the same Acti9 iC40 range, the closest peer would share the D curve and 3P+N poles but differ in rated current (e.g., 16 A or 20 A variants) — the A9P62710 is the 10 A version. No pin-compatible drop-in exists at a different rating; the current rating is the selection parameter.

What compliance documentation does Schneider provide for A9P62710?

The part carries EN/IEC 60898-1 and EN/IEC 60947-2 certification. RoHS and REACH compliance documentation is available on request from the manufacturer or distributor.

MPN
A9P62710