Skip to main content
Log in
Schneider Electric A9P62732 — Circuit Breaker Accessories

Schneider Electric A9P62732 Acti9 iC40 MCB, 32 A, D Curve, 3

MPNA9P62732
Active

Schneider Electric Acti9 iC40, miniature circuit breaker, 32 A, D curve, 3P+N, 4.5 kA Icn at 400 V AC, clip-on DIN rail.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

A9P62732 — Identification
ParameterValue
Product / component typeMiniature circuit-breaker
Product nameActi9 iC40
Product rangeActi9
Device applicationDistribution
A9P62732 — Electrical
ParameterValue
Network type (AC/DC)AC
Rated current [In]32 A
Rated operational voltage [Ue]400 V AC 50/60 Hz
Rated insulation voltage [Ui]440 V AC 50/60 Hz conforming to EN/IEC 60947-2
Rated impulse withstand voltage [Uimp]4 kV conforming to EN/IEC 60947-2
Network frequency50/60 Hz
Poles description3P + N
Magnetic tripping limit10...14 x In conforming to EN/IEC 60898-1 12 x In +/- 20 % conforming to EN/IEC 60947-2
A9P62732 — Protection & Performance
ParameterValue
Breaking capacity4500 A Icn at 400 V AC 50/60 Hz conforming to EN/IEC 60898-1 6 kA Icu at 400 V AC 50/60 Hz conforming to EN/IEC 60947-2
Rated service breaking capacity [Ics]4500 A 100 % x Icn at 400 V AC 50/60 Hz conforming to EN/IEC 60898-1 4.5 kA 75 % x Icu at 400 V AC 50/60 Hz conforming to EN/IEC 60947-2
Trip unit technologyThermal-magnetic
Earth-leakage protectionSeparate block
Suitability for isolationYes conforming to EN/IEC 60947-2
Mechanical durability20000 cycles
Electrical durability10000 cycles
Local signallingON/OFF indication Trip indicator
Contact position indicatorYes
A9P62732 — Mechanical
ParameterValue
Connections / terminalsTunnel type terminals top or bottom 1...10 mm² flexible Tunnel type terminals top or bottom 1...16 mm² rigid
Device short nameiC40
Control typeToggle
Mounting modeClip-on
Mounting supportDIN rail
Usable 9 mm pitches6
Width54 mm
Height85 mm
Depth74 mm
ColourWhite
A9P62732 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3 conforming to EN/IEC 60947-2
Operating ambient air temperature-25...70 °C
Storage ambient air temperature-40...85 °C
A9P62732 — Approvals
ParameterValue
StandardsEN/IEC 60898-1 EN/IEC 60947-2
A9P62732 — Specifications
ParameterValue
Curve codeD
Number of protected poles3

Product details

The Schneider Electric A9P62732 is an Acti9 iC40 miniature circuit breaker rated 32 A with a D tripping curve, 3 poles protected plus switched neutral (3P+N). It clips onto a standard DIN rail — the 54 mm width occupies 6 module pitches at 9 mm each, so plan for that slot in your enclosure layout. Breaking capacity is 4.5 kA Icn at 400 V AC per EN/IEC 60898-1 for the residential/commercial rating, and 6 kA Icu at 400 V AC per EN/IEC 60947-2 for the industrial rating. The D curve's magnetic trip threshold is 10–14 × In per IEC 60898-1, or 12 × In ±20 % per IEC 60947-2.

Clip-on mounting to DIN rail, neutral on the left. Tunnel terminals accept 1–16 mm² rigid or 1–10 mm² flexible copper; tighten to 2 N·m. Strip 14 mm for top or bottom connection. IP20 finger-safe on the front face; IP40 inside the modular enclosure. Thermal-magnetic trip unit. Padlocking provision on the toggle for lockout/tagout.

Frequently asked questions

What is the breaking capacity of A9P62732?

4.5 kA Icn at 400 V AC per EN/IEC 60898-1 and 6 kA Icu at 400 V AC per EN/IEC 60947-2. The higher figure applies under the industrial standard.

Where can I buy A9P62732 and how is it quoted?

Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What compliance documentation does this brand provide for A9P62732?

The breaker is certified to EN/IEC 60898-1 and EN/IEC 60947-2. Pollution degree 3 per IEC 60947-2. The Acti9 range typically carries CE, UKCA, and EAC markings; specific declarations are available from Schneider Electric on request.

MPN
A9P62732