Skip to main content
Log in
Schneider Electric A9Q04225 — Residual Current Breakers (RCCB/RCBO)

Schneider Electric A9Q04225 Acti9 Vigi iC60, 2P, 25A, 300mA,

MPNA9Q04225
Active

Schneider Electric Acti9 Vigi iC60, add-on residual current device, 2P, 25 A, AC type, instantaneous, 300 mA, 130 V AC.

Schneider Electric A9Q04225 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9Q04225 — Residual Current Protection
ParameterValue
Earth-leakage sensitivity (IΔn)300 mA
Earth-leakage trip time delayInstantaneous
Residual-current tripping technologyVoltage independent
Local signalling / indicationTrip indicator
A9Q04225 — Electrical Ratings
ParameterValue
Rated current (In)25 A
Rated operational voltage (Ue)130 V AC 50/60 Hz conforming to EN/IEC 61009-1 130 V AC 50/60 Hz conforming to EN/IEC 61009-2-1
Poles description2P
Network typeAC
Network frequency50/60 Hz
Rated insulation voltage (Ui)500 V AC 50/60 Hz conforming to IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV conforming to IEC 60947-2
Device location in systemOutgoer
A9Q04225 — Identification
ParameterValue
Product nameActi9 Vigi iC60
Product / component typeAdd-on residual current device
Product range / familyActi9
Device short nameVigi iC60
A9Q04225 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Width in 9 mm modules3
Terminal connectionsTunnel type terminal downside for 1 cable(s) 1...25 mm² rigid without cable end Tunnel type terminal downside for 1 cable(s) 1...16 mm² flexible without cable end Tunnel type terminal downside for 1 cable(s) 1...16 mm² flexible with cable end
Wire stripping length14 mm for bottom connection
Terminal tightening torque2 N.m bottom
Width27 mm
Height91 mm
Depth73.5 mm
A9Q04225 — Environmental
ParameterValue
Operating ambient temperature-5...60 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3 conforming to IEC 60947-2
A9Q04225 — Approvals
ParameterValue
StandardsEN/IEC 61009-1 EN/IEC 61009-2-1

Product details

The Schneider Electric A9Q04225 is an Acti9 Vigi iC60 add-on residual current device — a 2-pole, 25 A rated, 300 mA sensitivity, AC-type, instantaneous-trip RCD that clips onto the outgoing side of a compatible Acti9 iC60 MCB. It's a voltage-independent design, so it trips on residual current even if the phase voltage collapses, which matters for fault isolation in mixed-load panels.

Mounts via clip-on onto DIN rail (3 x 9 mm pitches = 27 mm wide). The bottom tunnel terminals accept 1 to 25 mm² rigid or 1 to 16 mm² flexible conductors, with a 14 mm strip length and 2 N·m tightening torque. IP20 on the body, IP40 inside a modular enclosure — fine for dry indoor panel environments, not for washdown zones.

Lifecycle status is Active per Schneider's current portfolio. This SKU is still in standard production and specified into new BOMs.

Frequently asked questions

What is A9Q04225's listed depth (73.5 mm) on this component line?

The A9Q04225 has a listed depth of 73.5 mm, which is standard for the Acti9 Vigi iC60 add-on RCD form factor.

What is A9Q04225's listed range (Acti9) on this component line?

The A9Q04225 belongs to the Schneider Electric Acti9 range, specifically the Vigi iC60 series of add-on residual current devices.

What compliance documentation does this brand provide for A9Q04225 (RoHS, REACH, UL, IEC)?

The A9Q04225 is designed and tested to EN/IEC 61009-1 and EN/IEC 61009-2-1 standards. It carries an IP20/IP40 degree of protection per IEC 60529, and its insulation and impulse withstand ratings comply with IEC 60947-2. For RoHS/REACH declarations, Schneider Electric typically provides compliance documentation upon request through the RFQ process.

MPN
A9Q04225