Skip to main content
Log in
Schneider Electric A9Q12225 — Residual Current Breakers (RCCB/RCBO)

A9Q12225 Acti9 Vigi iC60 2P 25A 100mA RCBO, Obsolete

MPNA9Q12225
Obsolete

Schneider Electric Acti9 Vigi iC60 add-on residual current device, 2P, 25 A, AC type, 100 mA, 230...415 V AC, instantaneous, clip-on DIN rail.

Schneider Electric A9Q12225 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9Q12225 — Residual Current Protection
ParameterValue
Earth-leakage sensitivity (IΔn)100 mA
Earth-leakage trip time delayInstantaneous
Residual-current tripping technologyVoltage independent
Local signalling / indicationTrip indicator
A9Q12225 — Electrical Ratings
ParameterValue
Rated current (In)25 A
Rated operational voltage (Ue)230...415 V AC 50/60 Hz conforming to EN/IEC 61009-1 230...415 V AC 50/60 Hz conforming to EN/IEC 61009-2-1
Poles description2P
Network typeAC
Network frequency50/60 Hz
Rated insulation voltage (Ui)500 V AC 50/60 Hz conforming to IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV conforming to IEC 60947-2
Device location in systemOutgoer
A9Q12225 — Identification
ParameterValue
Product nameActi9 Vigi iC60
Product / component typeAdd-on residual current device
Product range / familyActi9
Device short nameVigi iC60
A9Q12225 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Width in 9 mm modules3
Terminal connectionsTunnel type terminal downside for 1 cable(s) 1...25 mm² rigid without cable end Tunnel type terminal downside for 1 cable(s) 1...16 mm² flexible without cable end Tunnel type terminal downside for 1 cable(s) 1...16 mm² flexible with cable end
Wire stripping length14 mm for bottom connection
Terminal tightening torque2 N.m bottom
Width27 mm
Height91 mm
Depth73.5 mm
A9Q12225 — Environmental
ParameterValue
Operating ambient temperature-5...60 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3 conforming to IEC 60947-2
A9Q12225 — Approvals
ParameterValue
StandardsEN/IEC 61009-1 EN/IEC 61009-2-1

Product details

The Schneider Electric A9Q12225 is an Acti9 Vigi iC60 add-on residual current device — a 2P, 25 A, AC-type unit with 100 mA sensitivity and instantaneous trip. Rated for 230...415 V AC at 50/60 Hz, it carries EN/IEC 61009-1 and 61009-2-1 compliance, with an impulse withstand of 250 A (8/20 µs) and a rated insulation voltage of 500 V AC.

The 100 mA sensitivity is a common specification for socket-outlet circuits in commercial installations where 30 mA would cause nuisance tripping on leakage from connected equipment. The voltage-independent trip technology means the device clears a fault even if the line voltage is lost — a reliability advantage over electronically dependent RCDs. The IP20 rating covers the terminal area; the modular enclosure achieves IP40 inside the panel.

Frequently asked questions

How do I get current pricing and availability for A9Q12225?

The A9Q12225 is sourced through independent distribution against an RFQ. Availability and current pricing are confirmed at quote time.

What is the closest pin-compatible alternative to A9Q12225 in this component family?

No official successor order code is listed for the A9Q12225. A functionally equivalent replacement would need to match the 2P, 25 A, 100 mA, AC-type, instantaneous, voltage-independent, plug-in form factor — verify fit with the panel's DIN-rail layout and busbar compatibility.

What is A9Q12225's listed depth (73.5 mm) on this component line?

The A9Q12225 has a depth of 73.5 mm, a width of 27 mm (3 x 9 mm pitches), and a height of 91 mm.

What is A9Q12225's listed range (Acti9) on this component line?

The A9Q12225 belongs to the Schneider Electric Acti9 range, specifically the Acti9 Vigi iC60 series of add-on residual current devices.

What compliance documentation does this brand provide for A9Q12225 (RoHS, REACH, UL, IEC)?

The A9Q12225 is certified to EN/IEC 61009-1 and EN/IEC 61009-2-1. The manufacturer's standard compliance documentation package for the Acti9 range typically includes RoHS and REACH declarations; check the specific lot's certificate of conformity at order time.

MPN
A9Q12225