The Schneider Electric A9S68292 is an Acti9 iINT switch disconnector, a 2-pole device rated for 125 A at 400 V AC in AC-22A utilisation category. That AC-22A rating means it's designed for switching mixed resistive and inductive loads, including moderate motor loads, not just pure resistive circuits. It's also certified for isolation duty (suitability for isolation: yes), with a contact position indicator showing ON/OFF state directly on the toggle. The 6 kV rated impulse withstand voltage (Uimp) and 5 kA short-circuit making capacity (Icm) as a standalone switch tell you it can handle fault make events without welding contacts, provided the upstream protection coordinates.
DIN rail integration and panel fit
Mounts on standard DIN rail (mounting support: DIN rail), fixed position. The 36 mm width (2 x 18 mm pitches) and 85 mm height fit standard Acti9 modular spacing. Depth is 73 mm, so factor that into enclosure depth clearance — no issues in standard 120 mm deep enclosures. The tunnel-type terminals accept 6 to 50 mm² rigid cable, 6 to 35 mm² flexible, with a wire stripping length of 14 mm and tightening torque of 3.5 N.m.