The Schneider Electric A9S68380 is a three-pole switch disconnector from the Acti9 iINT family, rated for 80 A at 400 V AC in AC-22A utilisation category — meaning it handles mixed resistive and inductive loads, typical for motor circuits and distribution panels where you need both on-load switching and visible isolation. It's certified for isolation (suitability for isolation: yes), with a contact position indicator that gives you a visual open/closed confirmation — no guessing whether the circuit is dead when you're working downstream.
AC-22A category means it's rated for switching mixed loads — motors, transformers, resistive heaters — not just pure resistive. That's the typical panel application for a switch disconnector this size.
That's three 18 mm modular pitches, so it occupies the same footprint as a three-pole MCB. The toggle control and ON/OFF indication are right on the front; no extra panel cutout needed. Terminals accept up to 50 mm² rigid or 35 mm² flexible cable, tunnel type top or bottom. Strip length 14 mm.