Skip to main content
Schneider Electric A9S68391

Schneider Electric A9S68391 Acti9 iINT Switch Disconnector,

MPN A9S68391
Active

Schneider Electric Acti9 iINT switch disconnector, 3P, 100 A at 400 V AC, AC-22A, DIN rail mount, IP20, white.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9S68391 key specifications
ParameterValue
Control typeToggle
Main product or component typeSwitch disconnector
Voltage415 V AC 50/60 Hz
Insulation voltage ui500 V AC 50/60 Hz
Current100 A at 400 V AC 50/60 Hz
Utilization categoryAC-22 A
IP ratingIP20
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C

All specifications

A9S68391 additional specifications
ParameterValue
Pollution degree3
ColorWhite
Depth73 mm
Width54 mm
Height85 mm
Electrical life cycles10000 cycles
Mechanical life cycles20000 cycles
ApplicationControl Isolation
Operating temperature-25...60 °C

Product details

The AC-22A utilization category confirms it can switch mixed loads, not just resistive; this covers contactor-controlled motor circuits and heater banks. Rated insulation voltage (Ui) of 500 V AC gives headroom for 400 V systems. Short-time withstand current (Icw) of 1500 A means it can pass fault current for the short duration needed for an upstream protective device to clear — essential for selective coordination. Making capacity (Icm) of 5 kA as a stand-alone switch-disconnector means it can close onto a fault without welding contacts.

Snap-on DIN rail mounting, 54 mm wide (3 x 18 mm pitches), 85 mm tall, 73 mm deep. Occupies three modular spaces in a distribution board. Tunnel-type terminals accept rigid cable up to 50 mm² or flexible up to 35 mm²; tightening torque 3.5 N·m. Wire strip length 14 mm. Pollution degree 3 environment rating covers industrial atmospheres with conductive pollution.

MPN
A9S68391