Skip to main content
Log in
Schneider Electric A9T27625 — Residual Current Breakers (RCCB/RCBO)

Schneider Electric A9T27625 Acti9 iDPN H VigiARC, 25 A C-cur

MPNA9T27625
Active

Schneider Electric Acti9 iDPN H VigiARC RCBO, 1P+N, 25 A, C-curve, 10 kA breaking capacity at 240 V AC, integrated earth-leakage protection, DIN rail mount.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9T27625 — Residual Current Protection
ParameterValue
Earth-leakage protection class / typeClass A
Earth-leakage trip time delayInstantaneous
Residual-current tripping technologyVoltage dependent
Trip unit technologyThermal-magnetic
Local signalling / indicationON, OFF, fault trip
A9T27625 — Electrical Ratings
ParameterValue
Rated current (In)25 A
Rated operational voltage (Ue)230/240 V AC 50 Hz conforming to AS/NZS 61009.1 230/240 V AC 50 Hz conforming to IEC 62606
Poles description1P + N
Neutral pole positionLeft
Network typeAC
Network frequency50 Hz
Rated insulation voltage (Ui)250 V AC 50 Hz between phase and neutral 400 V AC 50 Hz between phases
Rated impulse withstand voltage (Uimp)4 kV conforming to AS/NZS 61009.1
Overvoltage categoryIII
Device location in systemOutgoer
Electrical durability10000 cycles 240 V AC 50 Hz conforming to AS/NZS 61009.1
Mechanical durability (operating cycles)20000 cycles
A9T27625 — Identification
ParameterValue
Product nameActi9 iDPN H VigiARC
Product / component typeArc fault detection RCBO
Product range / familyActi9
Device short nameiDPN H VigiARC
A9T27625 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Control typeToggle
Width in 9 mm modules4
Terminal connectionsTunnel type terminal for 2 cable(s) 2.5 mm² rigid Tunnel type terminal for 1 cable(s) 16 mm² rigid Tunnel type terminal for 2 cable(s) 2.5 mm² flexible Tunnel type terminal for 1 cable(s) 10 mm² flexible
Wire stripping length14 mm
Terminal tightening torque2 N.m
Width36 mm
Height91 mm
Depth75 mm
A9T27625 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to IEC 60529
Pollution degree2 conforming to AS/NZS 61009.1 2 conforming to IEC 62606
Relative humidity95 % at 55 °C
Operating altitude2000 m
TropicalisationSeverity B conforming to IEC 60068-2-30 for 28 d
A9T27625 — Approvals
ParameterValue
StandardsEN/IEC 62606 AS/NZS 61009.1

Product details

Rated at 25 A with a C-curve magnetic trip characteristic (5 to 10 times In), it breaks up to 10,000 A at 240 V AC per AS/NZS 61009.1. The integrated earth-leakage protection means one device covers both the MCB and RCD functions — saves a DIN rail slot and simplifies wiring in a distribution board.

The 25 A rating and C-curve suit general-purpose final subcircuits with moderate inrush — lighting banks, small motor loads, socket outlets. The thermal-magnetic trip unit gives a time-delayed overload response (thermal bimetal) and instantaneous magnetic trip on short-circuit; the C-curve's 5–10x In window avoids nuisance tripping on typical motor or capacitor-switching inrush. Integrated earth-leakage protection is rated per EN/IEC 62606 and AS/NZS 61009.1 — the same standards that cover RCBOs and residual current devices. The limitation class is 3 per AS/NZS 61009.1, which governs the energy let-through under fault conditions.

Frequently asked questions

What standards does the A9T27625 comply with?

It complies with EN/IEC 62606 and AS/NZS 61009.1 for RCBOs, carries RCM marking for Australia and New Zealand, and meets tropicalisation severity B per IEC 60068-2-30.

What is the breaking capacity of the A9T27625?

The breaking capacity is 10,000 A at 240 V AC, 50 Hz, conforming to AS/NZS 61009.1.

MPN
A9T27625