Skip to main content
Log in
Schneider Electric A9TDE3610 — Residual Current Breakers (RCCB/RCBO)

Schneider Electric A9TDE3610 Acti9 iCV40 ARC RCBO, 10 A B-Cu

MPNA9TDE3610
Active

Schneider Electric Acti9 iCV40 ARC, A9TDE3610, arc-fault detection RCBO, 1P+N, 10 A rated, B-curve, 6 kA Icn / 10 kA Icu breaking capacity, DIN rail clip-on.

$326.81Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9TDE3610 — Residual Current Protection
ParameterValue
Earth-leakage sensitivity (IΔn)30 mA
Earth-leakage protection class / typeType A-SI (Super Immunised)
Earth-leakage trip time delayInstantaneous
Residual-current tripping technologyVoltage independent
Trip unit technologyThermal-magnetic
Local signalling / indicationON, OFF, fault trip LED arc fault diagnostic
A9TDE3610 — Electrical Ratings
ParameterValue
Rated current (In)10 A
Rated operational voltage (Ue)230 V AC 50 Hz
Poles description1P + N
Neutral pole positionLeft
Network typeAC
Network frequency50 Hz
Rated insulation voltage (Ui)250 V AC 50 Hz between phase and neutral
Rated impulse withstand voltage (Uimp)4 kV
Overvoltage categoryIII
Device location in systemOutgoer
Electrical durability20000 cycles 230 V AC 50 Hz
Mechanical durability (operating cycles)20000 cycles
A9TDE3610 — Identification
ParameterValue
Product nameActi9 iCV40 ARC
Product / component typeArc fault detection RCBO
Product range / familyActi9
Device short nameiCV40N ARC
A9TDE3610 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Control typeToggle
Width in 9 mm modules4
Terminal connectionsTunnel type terminal 1...16 mm² rigid Tunnel type terminal 1...10 mm² flexible
Wire stripping length14 mm
Terminal tightening torque2 N.m
Width36 mm
Height91 mm
Depth73 mm
A9TDE3610 — Environmental
ParameterValue
Operating ambient temperature-25...50 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to IEC 60529
Pollution degree2 conforming to EN/IEC 62606
Relative humidity95 % at 55 °C
Operating altitude2000 m
TropicalisationSeverity B conforming to IEC 60068-2-30 for 28 d
A9TDE3610 — Approvals
ParameterValue
StandardsEN/IEC 62606 EN/IEC 61009-1 EN/IEC 60947-2 EN/IEC 61009-2-1

Product details

Arc-fault RCBO for final-circuit protection

Rated 10 A with a B-curve (magnetic trip 3–5× In), it breaks 6 kA Icn per EN/IEC 61009-2-1 and 10 kA Icu per EN/IEC 60947-2 at 230 V AC 50 Hz.

Clips onto standard DIN rail (EN 60715) and occupies 4 × 9 mm pitches — 36 mm wide — so it fits a 4-module slot in any Acti9 distribution board. The thermal-magnetic trip unit handles the 10 A continuous load; the arc-fault electronics monitor the series arc signature and trip on detection. Tunnel terminals accept 1–16 mm² rigid or 1–10 mm² flexible, stripped 14 mm, torqued to 2 N·m. Cable entry from top or bottom, neutral on the left. IP20 finger-safe for enclosed panel use.

Frequently asked questions

Where can I buy A9TDE3610 and what is the lead time?

This part is sourced to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm lead-time commitment.

What is the breaking capacity of A9TDE3610?

6 kA Icn per EN/IEC 61009-2-1 and 10 kA Icu per EN/IEC 60947-2 at 230 V AC 50 Hz — the Icu rating gives fault-withstand headroom above the service limit.

What standards does A9TDE3610 comply with?

It complies with EN/IEC 62606 (arc-fault detection), EN/IEC 61009-1 and -2-1 (RCBO), and EN/IEC 60947-2 (circuit-breaker). Pollution degree 2, overvoltage category III, tropicalisation severity B per IEC 60068-2-30 for 28 days.

MPN
A9TDE3610