Skip to main content
Log in
Schneider Electric A9TPED632 — Residual Current Breakers (RCCB/RCBO)

A9TPED632 Acti9 iC40N ARC 32A MCB, 1P+N, C-curve, 10kA

MPNA9TPED632
Active

Schneider Electric Acti9 Active ARC iC40N, A9TPED632, 1P+N miniature circuit breaker, 32 A rated, C-curve, breaking capacity 3 kA (Icn1) / 6 kA (Icn) / 10 kA (Icu) at 230 V AC, 50 Hz, DIN-rail clip-on, IP20.

$353.05Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9TPED632 — Residual Current Protection
ParameterValue
Trip unit technologyThermal-magnetic
Local signalling / indicationON, OFF, fault trip LED arc fault diagnostic
A9TPED632 — Electrical Ratings
ParameterValue
Rated current (In)32 A
Rated operational voltage (Ue)230 V AC 50 Hz
Poles description1P + N
Neutral pole positionLeft
Network typeAC
Network frequency50 Hz
Rated insulation voltage (Ui)250 V AC
Rated impulse withstand voltage (Uimp)4 kV
Device location in systemOutgoer
Electrical durability10000 cycles
Mechanical durability (operating cycles)20000 cycles
A9TPED632 — Identification
ParameterValue
Product nameActi9 Active ARC iC40
Product / component typeActive arc fault detection circuit breaker
Product range / familyActi9
Device short nameiC40N ARC
A9TPED632 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Control typeToggle
Width in 9 mm modules4
Terminal connectionsTunnel type terminal 1...10 mm² flexible Tunnel type terminal 1...16 mm² rigid
Wire stripping length14 mm
Terminal tightening torque2 N.m
Width36 mm
Height91 mm
Depth73 mm
A9TPED632 — Environmental
ParameterValue
Operating ambient temperature-25...40 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to IEC 60529
Pollution degree2
Operating altitude2000 m
TropicalisationSeverity B conforming to IEC 60068-2-30 for 28 d
A9TPED632 — Approvals
ParameterValue
StandardsEN/IEC 60898-1 EN/IEC 60947-2 EN/IEC 62606

Product details

The A9TPED632 is a 32 A, 1P+N miniature circuit breaker from the Acti9 Active ARC iC40N series, with a C-curve (magnetic trip 5 to 10 x In) and thermal-magnetic trip unit. It carries three breaking-capacity ratings: 3000 A Icn1, 6000 A Icn, and 10 kA Icu, all at 230 V AC 50 Hz, conforming to EN/IEC 60898-1 and EN/IEC 60947-2. The arc-fault detection (series name Active ARC) adds a layer of event management for overvoltage, earth leakage, and overload — the local signalling includes an ON/OFF toggle, a fault-trip LED, and an arc-fault diagnostic LED.

The three breaking capacities reflect different standards: Icn1 (3000 A) and Icn (6000 A) per EN/IEC 60898-1 for household-type duty, and Icu (10 kA) per EN/IEC 60947-2 for industrial distribution.

Clip-on mounting to a DIN rail (35 mm per EN 60715), 36 mm wide (4 x 9 mm pitches), 91 mm high, 73 mm deep. The tunnel-type terminals accept 1 to 16 mm² rigid or 1 to 10 mm² flexible wire; strip length 14 mm, tightening torque 2 N·m. Cable entry from top and bottom, neutral on the left.

Frequently asked questions

What is the breaking capacity of A9TPED632?

The A9TPED632 has three breaking capacity ratings: 3000 A Icn1 and 6000 A Icn per EN/IEC 60898-1, and 10 kA Icu per EN/IEC 60947-2, all at 230 V AC 50 Hz.

What standards does A9TPED632 comply with?

It conforms to EN/IEC 60898-1, EN/IEC 60947-2, and EN/IEC 62606 (arc-fault detection device standard).

Where can I buy A9TPED632 and how is it quoted?

We source and quote the A9TPED632 to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm commercial offer.

MPN
A9TPED632