Skip to main content
Schneider Electric A9V11440 — Residual Current Breakers (RCCB/RCBO)

A9V11440 Acti9 Vigi iC60 4P 40A 30mA Type AC RCD

MPNA9V11440
Obsolete

Schneider Electric Acti9 Vigi iC60 add-on residual current device, 4P, 40 A, 30 mA, Type AC, 400 V AC, DIN rail clip-on.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9V11440 — Residual Current Protection
ParameterValue
Earth-leakage sensitivity (IΔn)30 mA
Earth-leakage trip time delayInstantaneous
Residual-current tripping technologyVoltage independent
Local signalling / indicationTrip indicator
A9V11440 — Electrical Ratings
ParameterValue
Rated current (In)40 A
Rated operational voltage (Ue)400 V AC 50/60 Hz conforming to EN 61009-1 400/415 V AC 50/60 Hz conforming to IEC 61009-1
Poles description4P
Network typeAC
Network frequency50/60 Hz
Rated insulation voltage (Ui)500 V AC 50/60 Hz conforming to IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV conforming to IEC 60947-2
Device location in systemOutgoer
A9V11440 — Identification
ParameterValue
Product nameActi9 Vigi iC60
Product / component typeAdd-on residual current device
Product range / familyActi9
Device short nameVigi iC60
A9V11440 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Width in 9 mm modules7
Terminal connectionsTunnel type terminal downside for 1 cable(s) 1...35 mm² rigid without cable end Tunnel type terminal downside for 1 cable(s) 1...25 mm² flexible without cable end Tunnel type terminal downside for 1 cable(s) 1...25 mm² flexible with cable end
Wire stripping length14 mm for bottom connection
Terminal tightening torque3.5 N.m bottom
Width135 mm
Height91 mm
Depth73.5 mm
A9V11440 — Environmental
ParameterValue
Operating ambient temperature-5...60 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3 conforming to IEC 60947-2
A9V11440 — Approvals
ParameterValue
StandardsEN 61009-1 IEC 61009-1

Product details

The A9V11440 is an Acti9 Vigi iC60 add-on residual current device block — 4 poles, rated 40 A with 30 mA sensitivity, Type AC earth leakage protection.

This order code is obsolete per the manufacturer's lifecycle record.

Type AC detection means it trips on sinusoidal AC earth faults only — not on pulsed DC or smooth DC waveforms, so it is correct for resistive and inductive AC loads but not for variable-speed drives, UPS-fed circuits, or EV chargers that generate DC fault content. The 400/415 V AC operational voltage covers three-phase 4-wire networks up to 400 V phase-to-phase. Pollution degree 3 (IEC 60947-2) confirms it is rated for the conductive environment inside a standard distribution board.

Panel integration

The tunnel-type terminals on the bottom accept 1…35 mm² rigid or 1…25 mm² flexible conductors; stripping length is 14 mm. Tightening torque 3.5 N·m. The trip indicator gives local visual feedback after a fault event.

Frequently asked questions

What is the closest alternative to A9V11440?

The evidence does not list an official successor order code. A functionally equivalent current-production Acti9 Vigi iC60 variant with the same 4P, 40 A, 30 mA, Type AC specification would be the closest drop-in candidate, sharing the same DIN-rail footprint and 7-module width. Verify the exact catalogue number against your BOM before ordering.

Where can I buy A9V11440?

This obsolete part is sourced through independent industrial-automation distributors. Submit an RFQ for current pricing and availability — quotes are confirmed at order time against the open market.

What compliance documentation does Schneider Electric provide for A9V11440?

The part is certified to EN 61009-1 and IEC 61009-1 for residual current circuit breakers. Rated insulation voltage 500 V AC per IEC 60947-2, impulse withstand 6 kV per the same standard. The evidence does not list RoHS, REACH, or UL documentation; verify with the supplier at quote time.

MPN
A9V11440