Skip to main content
Schneider Electric A9V16440

Schneider Electric A9V16440 Vigi iC60, 4P 40A 500mA AC Type

MPN A9V16440
Obsolete

Schneider Electric Acti9 Vigi iC60 add-on residual current device, 4P, 40 A rated current, 500 mA sensitivity, Type AC, voltage-independent tripping, obsolete.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9V16440 specifications
ParameterValue
Main product or component typeAdd-on residual current device
Voltage230...415 V AC 50/60 Hz conforming to EN/IEC 61009-1 230...415 V AC 50/60 Hz conforming to EN/IEC 61009-2-1
Insulation voltage ui500 V AC 50/60 Hz conforming to IEC 60947-2
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-5 °C
Storage temperature-40...85 °C
Pollution degree3 conforming to IEC 60947-2
Depth73.5 mm
Width135 mm
Height91 mm
Operating temperature-5...60 °C

Product details

The Schneider Electric A9V16440 is an Acti9 Vigi iC60 add-on residual current device block — a 4-pole, 40 A, 500 mA sensitivity Type AC unit that clips onto the outgoing side of an iC60 MCB to provide earth-leakage protection in a single-module width. It is voltage-independent, meaning the residual current tripping mechanism operates without needing a separate power supply, and it carries an instantaneous trip characteristic. The part is now classified as obsolete by the manufacturer.

The 40 A rated current (In) matches the iC60 MCB it attaches to. The 500 mA sensitivity is a high-threshold setting — suited for circuits where nuisance tripping from normal leakage must be avoided, rather than for personnel protection. Type AC detection responds to sinusoidal AC residual currents only.

Clip-on mounting to DIN rail, occupying 7 x 9 mm pitches (135 mm width). The block connects to the MCB via screws on the bottom terminals, which accept 1 to 35 mm² rigid cable or 1 to 25 mm² flexible with or without ferrules.

MPN
A9V16440