Schneider Electric Acti9 Vigi iC60 add-on residual current device, 4P, 63 A, 30 mA, Type A, 400-415 V AC, clip-on DIN rail mount.
| Parameter | Value |
|---|---|
| Earth-leakage sensitivity (IΔn) | 30 mA |
| Earth-leakage trip time delay | Instantaneous |
| Residual-current tripping technology | Voltage independent |
| Local signalling / indication | Trip indicator |
| Parameter | Value |
|---|---|
| Rated current (In) | 63 A |
| Rated operational voltage (Ue) | 400...415 V AC 50/60 Hz conforming to EN/IEC 61009-1 400...415 V AC 50/60 Hz conforming to EN/IEC 61009-2-1 |
| Poles description | 4P |
| Network type | AC |
| Network frequency | 50/60 Hz |
| Rated insulation voltage (Ui) | 500 V AC 50/60 Hz conforming to IEC 60947-2 |
| Rated impulse withstand voltage (Uimp) | 6 kV conforming to IEC 60947-2 |
| Device location in system | Outgoer |
| Parameter | Value |
|---|---|
| Product name | Acti9 Vigi iC60 |
| Product / component type | Add-on residual current device |
| Product range / family | Acti9 |
| Device short name | Vigi iC60 |
| Parameter | Value |
|---|---|
| Mounting support | DIN rail |
| Mounting mode | Clip-on |
| Width in 9 mm modules | 7 |
| Terminal connections | Tunnel type terminal downside for 1 cable(s) 1...35 mm² rigid without cable end Tunnel type terminal downside for 1 cable(s) 1...25 mm² flexible without cable end Tunnel type terminal downside for 1 cable(s) 1...25 mm² flexible with cable end |
| Wire stripping length | 14 mm for bottom connection |
| Terminal tightening torque | 3.5 N.m bottom |
| Width | 135 mm |
| Height | 91 mm |
| Depth | 73.5 mm |
| Parameter | Value |
|---|---|
| Operating ambient temperature | -25...60 °C |
| Storage ambient temperature | -40...85 °C |
| IP degree of protection | IP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529 |
| Pollution degree | 3 conforming to IEC 60947-2 |
| Parameter | Value |
|---|---|
| Standards | EN/IEC 61009-1 EN/IEC 61009-2-1 |
Rated 63 A with 30 mA sensitivity, it provides instantaneous ground-fault protection for 4-pole circuits on 400-415 V AC networks (50/60 Hz).
Clip-on mounting to DIN rail, 7 module pitches wide (135 mm). The 73.5 mm depth keeps it within standard distribution-board enclosure depth. Bottom tunnel terminals accept 1 to 35 mm² rigid cable (25 mm² flexible); strip length 14 mm, tighten to 3.5 N·m. IP20 on the body, IP40 inside a modular enclosure — fine for dry indoor panels but not washdown areas.
The A9V21463 has a depth of 73.5 mm, which is standard for the Vigi iC60 add-on block and fits within typical distribution-board enclosure depths.
The A9V21463 belongs to the Schneider Electric Acti9 range, which is the current-generation modular protection and control platform for final-distribution panels.