Skip to main content
Log in
Schneider Electric A9V29263 — Residual Current Breakers (RCCB/RCBO)

A9V29263 Acti9 Vigi iC60 RCD, 2P 63A Type A Selective 1000mA

MPNA9V29263
Obsolete

Schneider Electric Acti9 Vigi iC60 add-on residual current device, A9V29263, 2P, 63 A, Type A, selective, 1000 mA, 230…415 V AC.

Schneider Electric A9V29263 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9V29263 — Residual Current Protection
ParameterValue
Earth-leakage sensitivity (IΔn)1000 mA
Earth-leakage trip time delaySelective
Residual-current tripping technologyVoltage independent
Local signalling / indicationTrip indicator
A9V29263 — Electrical Ratings
ParameterValue
Rated current (In)63 A
Rated operational voltage (Ue)230...415 V AC 50/60 Hz conforming to EN/IEC 61009-1 230...415 V AC 50/60 Hz conforming to EN/IEC 61009-2-1
Poles description2P
Network typeAC
Network frequency50/60 Hz
Rated insulation voltage (Ui)500 V AC 50/60 Hz conforming to IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV conforming to IEC 60947-2
Device location in systemOutgoer
A9V29263 — Identification
ParameterValue
Product nameActi9 Vigi iC60
Product / component typeAdd-on residual current device
Product range / familyActi9
Device short nameVigi iC60
A9V29263 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Width in 9 mm modules4
Terminal connectionsTunnel type terminal downside for 1 cable(s) 1...35 mm² rigid without cable end Tunnel type terminal downside for 1 cable(s) 1...25 mm² flexible without cable end Tunnel type terminal downside for 1 cable(s) 1...25 mm² flexible with cable end
Wire stripping length14 mm for bottom connection
Terminal tightening torque3.5 N.m bottom
Width72 mm
Height91 mm
Depth73.5 mm
A9V29263 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3 conforming to IEC 60947-2
A9V29263 — Approvals
ParameterValue
StandardsEN/IEC 61009-1 EN/IEC 61009-2-1

Product details

The A9V29263 is an add-on residual current device from the Acti9 Vigi iC60 range — a 2-pole, 63 A unit with Type A earth-leakage protection, selective time delay, and 1000 mA sensitivity.

Type A protection detects sinusoidal AC and pulsating DC residual currents, which covers most modern electronic loads (switched-mode supplies, variable-speed drives). The selective (time-delayed) characteristic means it will not trip on transient earth faults or inrush; it coordinates with downstream instantaneous RCDs so only the faulted branch clears. Voltage-independent tripping means the RCD operates even if the line voltage collapses — a safety advantage on circuits where loss of neutral could otherwise blind the protection.

Panel integration

Tunnel-type terminals at the bottom accept 1…35 mm² rigid or 1…25 mm² flexible conductors; tighten to 3.5 N·m. IP20 finger-safe with the modular enclosure in place, IP40 inside the panel. Pollution degree 3 per IEC 60947-2 — rated for the conductive-dust environment typical of industrial switchboards.

Frequently asked questions

Where can I buy A9V29263?

A9V29263 is sourced and quoted to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time — no stock or price figures are published here.

What is the closest alternative to A9V29263 in the Acti9 family?

Schneider does not list a direct successor under a different order code for this specific variant. For a parametric match — 2P, 63 A, Type A, selective, 1000 mA — the current Acti9 range offers functionally similar add-on RCDs; verify the exact sensitivity and time-delay class against the panel design before substituting.

What compliance documentation does Schneider provide for A9V29263?

The device is designed to EN/IEC 61009-1 and EN/IEC 61009-2-1, with impulse withstand tested to 8/20 µs, 3000 A per IEC 61009-1. Rated insulation voltage 500 V AC, impulse withstand 6 kV per IEC 60947-2. Standard Schneider documentation (declaration of conformity, CE marking) accompanies the part; specific RoHS/REACH declarations are available on request at quote time.

MPN
A9V29263