Skip to main content
Schneider Electric A9V29363

Schneider Electric A9V29363 Acti9 Vigi iC60 RCD, 3P, 63A, 10

MPN A9V29363
Active

Schneider Electric Acti9 Vigi iC60 add-on residual current device, A9V29363, 3P, 63 A, Type A, selective, 1000 mA, 230…415 V AC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9V29363 specifications
ParameterValue
Main product or component typeAdd-on residual current device
Voltage230...415 V AC 50/60 Hz conforming to EN/IEC 61009-1 230...415 V AC 50/60 Hz conforming to EN/IEC 61009-2-1
Insulation voltage ui500 V AC 50/60 Hz conforming to IEC 60947-2
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C
Pollution degree3 conforming to IEC 60947-2
Depth73.5 mm
Width117 mm
Height91 mm
Operating temperature-25...60 °C

Product details

The Schneider Electric A9V29363 is an Acti9 Vigi iC60 add-on residual current device, 3-pole, rated 63 A with a 1000 mA Type A earth-leakage sensitivity and selective time delay. The voltage-independent tripping means it clears a ground fault even if the line voltage collapses — no auxiliary supply needed.

The 63 A [In] is the continuous current the Vigi iC60 can carry without derating in a 30 °C ambient — match it to the upstream MCB rating. The 1000 mA sensitivity is selective (time-delayed), so it coordinates downstream of a 30 mA or 300 mA RCD; the selective delay lets the downstream device trip first on a hard fault, keeping only the branch off instead of the whole submain. Type A protection covers sinusoidal AC and pulsating DC residual currents up to 6 mA smooth DC — the standard for single-phase electronics loads like VFDs, UPSs, and LED drivers.

Clip-on DIN-rail mounting, 7 x 9 mm pitches (117 mm wide). The bottom tunnel terminals accept 1…35 mm² rigid or 1…25 mm² flexible (with or without ferrule), stripped to 14 mm, torqued to 3.5 N.m. Electrical connection to the adjacent MCB is by screws — no busbar jumper needed between the two units. IP20 on the body, IP40 inside a modular enclosure.

MPN
A9V29363