Schneider Electric Acti9 Vigi iC60, add-on residual current device, 2P, 25 A, 10 mA, AC type, clip-on DIN rail mount.
| Parameter | Value |
|---|---|
| Earth-leakage sensitivity (IΔn) | 10 mA |
| Earth-leakage trip time delay | Instantaneous |
| Residual-current tripping technology | Voltage independent |
| Local signalling / indication | Trip indicator |
| Parameter | Value |
|---|---|
| Rated current (In) | 25 A |
| Rated operational voltage (Ue) | 230...240 V AC 50/60 Hz conforming to EN 61009-1 230...240 V AC 50/60 Hz conforming to IEC 61009-1 |
| Poles description | 2P |
| Network type | AC |
| Network frequency | 50/60 Hz |
| Rated insulation voltage (Ui) | 500 V AC 50/60 Hz conforming to IEC 60947-2 |
| Rated impulse withstand voltage (Uimp) | 6 kV conforming to IEC 60947-2 |
| Device location in system | Outgoer |
| Parameter | Value |
|---|---|
| Product name | Acti9 Vigi iC60 |
| Product / component type | Add-on residual current device |
| Product range / family | Acti9 |
| Device short name | Vigi iC60 |
| Parameter | Value |
|---|---|
| Mounting support | DIN rail |
| Mounting mode | Clip-on |
| Width in 9 mm modules | 3 |
| Terminal connections | Tunnel type terminals downside 1...25 mm² rigid Tunnel type terminals downside 1...16 mm² flexible |
| Wire stripping length | 14 mm |
| Terminal tightening torque | 2 N.m |
| Width | 63 mm |
| Height | 91 mm |
| Depth | 74 mm |
| Parameter | Value |
|---|---|
| Operating ambient temperature | -5...60 °C |
| Storage ambient temperature | -40...85 °C |
| IP degree of protection | IP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529 |
| Pollution degree | 3 conforming to IEC 60947-2 |
| Parameter | Value |
|---|---|
| Standards | EN 61009-1 IEC 61009-1 |
It is a 2-pole unit rated 25 A with a 10 mA AC-type sensitivity, designed for 230–240 V AC 50/60 Hz networks. The clip-on mounting snaps directly onto a DIN rail, occupying 3 module pitches (63 mm wide). The 10 mA sensitivity is the lowest standard threshold for AC-type earth leakage. The instantaneous trip time clears the fault as soon as residual current exceeds 10 mA.
The device is certified to EN 61009-1 and IEC 61009-1. IP20 on the body and IP40 on the modular enclosure.
No official replacement is listed in the lifecycle record. Within the Acti9 Vigi iC60 range, a functionally similar add-on RCD with the same 2P, 25 A, 10 mA, AC-type ratings would be the closest parametric match, but form-fit-function equivalence must be verified against the specific MCB it mates with. The manufacturer does not document a direct cross-reference.
No related articles