Schneider ABL7RE2403 Modicon — now discontinued, supplied from remaining surplus and broker stock.
| Parameter | Value |
|---|---|
| Range of product | Modicon Power Supply |
| Power supply type | Regulated switch mode |
| Input protection type | Integrated fuse (not interchangeable) |
| Output protection type | Against undervoltage, protection technology: tripping if U < 19 V Against short-circuits |
| Product or component type | Power supply |
| Output voltage | 24 V DC |
| Input voltage limits | 170...264 V AC |
| Nominal input voltage | 200...240 V AC phase to phase, terminal(s): L1-L2 200...240 V AC single phase, terminal(s): N-L1 |
| Output voltage adjustment | 22.2...28.8 V adjustable |
| Inrush current | 90 A |
| Current consumption | 0.7 A 240 V AC |
| Power supply output current | 2.5 A |
| Parameter | Value |
|---|---|
| Power factor | 0.5 at 24 V DC |
| Rated power in | 60 W |
| Power dissipation in | 11.4 W |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Mounting support | 35 x 7.5 mm symmetrical DIN rail panel 2 screws, diameter : 4 mm 35 x 15 mm symmetrical DIN rail |
| Connections - terminals | Screw type terminals: 2 x 0.14...2 x 2.5 mm², (AWG 26...AWG 14) for input connection Screw type terminals: 4 x 0.14...4 x 2.5 mm², (AWG 26...AWG 14) for output connection |
| Standards | EN/IEC 62368-1 |
| Supply | SELV conforming to IEC 60950-1 SELV conforming to IEC 60204-1 SELV conforming to IEC 60364-4-41 |
| Marking | CE |
| Efficiency | 84 % |
| Status LED | 1 LED (green) output voltage |
| Output coupling | Series Parallel |
| Residual ripple | 200 mV |
| Operating position | Vertical |
| Provided equipment | Power factor correction filter conforming to IEC 61000-3-2 |
| Dielectric strength | 3000 V with between input and output |
| Anti-harmonic filter | Low frequency harmonic currents |
| Environmental characteristic | EMC conforming to EN 55022 class B EMC conforming to IEC 61000-6-3 EMC conforming to IEC 61000-6-2 EMC conforming to EN/IEC 61204-3 Safety conforming to IEC 60950-1 |
| Ambient air temperature for operation | -25...55 °C without derating mounting position A < 2000 m |
The ABL7RE2403 is a Schneider Modicon power supply delivering a regulated 24 V DC output at 2.5 A from a 240 V AC input, with SELV compliance per IEC 60950-1, IEC 60204-1, and IEC 60364-4-41.
Output protection trips on undervoltage below 19 V and on short-circuits. The unit mounts on 35 x 7.5 mm or 35 x 15 mm symmetrical DIN rail, with screw terminals accepting 0.14 to 2.5 mm² wire.
No related articles