Schneider Electric ABLS1A48100E
MPNABLS1A48100E
Active
single phase power supply, 100 to 240V AC input, 48V DC output, 480W, Din-rail, IP20
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Range of product | Easy Modicon ABL2 |
| Power supply type | Regulated switch mode |
| Input protection type | Integrated fuse (not interchangeable) |
| Output protection type | Against overload, protection technology: 1.1...1.3 x In overload protection Against overvoltage, protection technology: tripping if U between 56...65 V Against short-circuits, protection technology: manual reset Thermal, protection technology: auto reset |
| Product or component type | Power supply |
| Output voltage | 48 V DC |
| Main input voltage | 100...240 V AC single phase 140...340 V DC |
| Input voltage limits | 90...264 V AC 127...370 V DC |
| Output voltage limits | 43.2...55.2 V |
| Inrush current | 20 A at 115 V AC 35 A at 230 V AC |
| Current consumption | at 100 V at 240 V |
| Power supply output current | 10 A |
All specifications
| Parameter | Value |
|---|---|
| Rated power in | 480 W |
| Power dissipation in | 37.5 W |
| Network frequency | 47...63 Hz |
| IP degree of protection | IP20 conforming to EN 62368-1 |
| Connections - terminals | For ground connection: screw type terminals, connection capacity: 1 x 4 mm² AWG 12 For input connection: screw type terminals, connection capacity: 2 x 4 mm² AWG 12 For output connection: screw type terminals, connection capacity: 4 x 4 mm² AWG 12 |
| Pollution degree | 2 |
| Relative humidity | 10...95 % |
| Operating altitude | 6561.68 ft (2000 m) 5000 m |
| Vibration resistance | 2 gn (f= 10...500 Hz) conforming to IEC 60068-2-6 |
| Depth | 5.04 in (128 mm) |
| Width | 3.3 in (85 mm) |
| Height | 4.9 in (125 mm) |
| Meantime between failure [MTBF] | 100000 h at 104 °F (40 °C) |
| Cos phi | 0.9...0.98 |
| Marking | CE UL |
| Category | US1CP1222525 |
| Efficiency | 80 % |
| Status LED | 1 LED (Green) output voltage |
| Holding time | >= 16 ms at 115 V |
| Name of test | Radiated electromagnetic field conforming to EN 61000-4-3 level 3A Electrostatic discharges conforming to EN 61000-4-2 level 3B Electrical fast transients/bursts conforming to EN 61000-4-4 level 3B Surge conforming to EN 61000-4-5 level 3B Conducted conforming to EN 61000-4-6 level 3A Emission conforming to EN 55032 conforming to EN 61000-3-2 |
| Operating position | Vertical |
| Dielectric strength | 2000 V between input and ground 3000 V between input and output 500 V between output and ground |
| Overvoltage category | II |
| Line and load regulation | +/- 1 % |
| Environmental characteristic | Safety conforming to EN 62368-1 EMC conforming to BS EN/EN 61000-4-2/3/4/5/6/8/11 EMC conforming to EN 55032 EMC conforming to EN 61000-3-2 |
| Ambient air temperature for storage | -40...185 °F (-40...85 °C) |
| Ambient air temperature for operation | 68...122 °F (20...50 °C) (without derating) 122...158 °F (50...70 °C) (with derating factor) |
MPN
ABLS1A48100E