Continuous output current is 215 A at 2.5 kHz switching frequency for normal duty, derating to 175 A for heavy duty. That gives you 1.1x current boost for 60 s under normal duty, 1.5x for heavy duty — enough for demanding starts but not for continuous overload. The switching frequency is adjustable from 2.5 to 4.9 kHz with a derating factor; lower frequencies mean less heat in the module but more audible noise on the motor. Apparent power runs 179 kVA normal duty, 158 kVA heavy duty at 600 V — useful for sizing upstream transformer. THDI is under 48% from 80-100% load, which meets most plant harmonic limits but check your site-specific requirement.
Schneider APM1A0C20S6 Power Module, 200HP, Obsolete
MPNAPM1A0C20S6
Obsolete
Schneider Electric Altivar Process Modular, power module, APM1A0C20S6, 200 HP at 600 V, 215 A continuous output, obsolete.
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Product range / series | Altivar Process Modular |
| Device short name / model code | APM |
| Product / component type | Power module |
| Parameter | Value |
|---|---|
| Rated supply voltage | 600 V - 15...10 % |
| Network phases | 3 phases |
| Supply frequency | 50...60 Hz - 5...5 % |
| Prospective line short-circuit current (Isc) | 50 kA |
| EMC filter | Integrated with 300 m conforming to IEC 61800-3 category C3 |
| Max. input current THD (THDi) | <48 % from 80...100 % of load |
| Parameter | Value |
|---|---|
| Apparent power | 179 kVA at 600 V normal duty 158 kVA at 600 V heavy duty |
| Continuous output current | 215 A at 2.5 kHz for normal duty 175 A at 2.5 kHz for heavy duty |
| Switching (PWM) frequency | 2...4.9 kHz with derating factor 2.5...4.9 kHz adjustable |
| Parameter | Value |
|---|---|
| Mounting mode | Cabinet mount |
| Product destination / compatibility | Synchronous motors Asynchronous motors |
| Parameter | Value |
|---|---|
| Degree of protection (IEC, IP) | UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration) |
| IP rating (with kit options) | IP00 conforming to IEC 61800-5-1 IP21 (for cabinet integration) conforming to IEC 61800-5-1 IP54 (for cabinet integration) conforming to IEC 61800-5-1 |
| Operating ambient temperature | -10...40 °C (without derating) 40...50 °C (with derating factor) |
| Storage temperature | -40...70 °C |
| Operating altitude (with derating) | <= 4800 m with current derating above 1000m |
| Relative humidity | 5...95 % without condensation conforming to IEC 60068-2-3 |
| Pollution degree | 2 conforming to IEC 61800-5-1 |
| Environmental resistance classes | Chemical pollution resistance class 3C3 conforming to IEC 60721-3-3 Dust pollution resistance class 3S3 conforming to IEC 60721-3-3 |
| Vibration resistance | 1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6 |
| Shock resistance | 4 gn for 11 ms conforming to IEC 60068-2-27 |
| Parameter | Value |
|---|---|
| Standards | UL 61800-5-1 IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 |
| Agency markings / approvals | CE |
Product details
MPN
APM1A0C20S6