The Schneider Electric APM1L0LCMY6 is a line choke module in the Altivar Process Modular range, designed to sit between the supply and the drive power stage. It handles 500...690 V three-phase input, with the supply frequency held at 50...60 Hz ±5%. The module is liquid-cooled, which means it rejects heat to a coolant loop rather than relying on cabinet airflow — a key distinction for sealed or high-density enclosures where traditional fan cooling is impractical.
The voltage range is 500...690 V -10...10 %. It is a three-phase module with an integrated EMC filter rated to IEC 61800-3 category C3. Physical mounting is cabinet-mount only. The module measures 1124 mm high × 246 mm wide × 392 mm deep, so it occupies a full-height compartment in a multi-drive cabinet. The IP00 base rating means it is not touch-safe on its own; it relies on the cabinet enclosure for the IP21 or IP66 rating stated for cabinet integration. UL Type 1 and Type 12 ratings are available once installed, matching typical North American panel requirements. Operating temperature is -10 to 40 °C without derating, and up to 50 °C with a derating factor. Altitude derating starts above 1000 m, with operation possible up to 4800 m. The pollution degree is 2, which is standard for controlled environments — no special coating needed for most industrial atmospheres, though the chemical and dust resistance class 3C3 / 3S3 suggests it can tolerate moderate industrial contaminants.
APM1L0LCMY6 is an active, current-production part. That means it is available through the standard Schneider distribution network, and the BOM line can be specified without last-time-buy risk. The liquid-cooled design limits direct drop-in alternatives within the Altivar Process Modular family; if the cabinet is plumbed for liquid cooling, this is the intended line choke for that architecture.