Schneider Electric APM6B0CTLN4
MPNAPM6B0CTLN4
Active
LOW HARM. CONTROL UNIT ATV600 -380 480V|LOW HARM. CONTROL UNIT ATV600 -380 480V
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Connector type | RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP RJ45 (on the remote graphic terminal) for Modbus serial |
| Range of product | Altivar Process Modular |
| Type of polarization | No impedance for Modbus serial |
| Product or component type | Control module |
| Supply voltage | 380...480 V |
| Power dissipation in | Forced convection: 2980 W, switching frequency 2.5 kHz |
| Supply frequency | 50...60 Hz - 5...5 % |
| Frequency resolution | Display unit: 0.1 Hz Analog input: 0.012/50 Hz |
| IP degree of protection | IP00 conforming to IEC 61800-5-1 IP00 conforming to IEC 60529 |
| Physical interface | 2-wire RS 485 for Modbus serial |
| Communication port protocol | Modbus serial Ethernet Modbus TCP |
| Pollution degree | 2 conforming to IEC 61800-5-1 |
All specifications
| Parameter | Value |
|---|---|
| Shock resistance | 7 gn for 11 ms conforming to IEC 60068-2-27 |
| Relative humidity | 5...95 % without condensation conforming to IEC 60068-2-3 |
| Operating altitude | 1000...4800 m with current derating 1 % per 100 m |
| Vibration resistance | 1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6 |
| Standards | IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 |
| Supply | External supply for digital inputs: 24 V DC (19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO: 24 V DC (21...27 V), 1 MOhm 500 V DC for 1 minute to earth |
| Marking | CE |
| Data format | 8 bits, configurable odd, even or no parity for Modbus serial |
| Noise level | 69 dB conforming to 86/188/EEC |
| Maximum THDI | <48 % full load conforming to IEC 61000-3-12 |
| Exchange mode | Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP |
| Safety function | STO (safe torque off) SIL 3 |
| Method of access | Slave Modbus TCP |
| Device short name | APM |
| Transmission rate | 10/100 Mbit/s for Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial |
| Transmission frame | RTU for Modbus serial |
| Number of addresses | 1...247 for Modbus serial |
| Discrete input logic | 16 preset speeds |
| Environmental characteristic | Chemical pollution resistance class 3C3 conforming to IEC 60721-3-3 Dust pollution resistance class 3S3 conforming to IEC 60721-3-3 |
| Electromagnetic compatibility | Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 |
| Ambient air temperature for storage | -40...70 °C |
| Ambient air temperature for operation | -10...40 °C 40...50 °C (with derating factor) |
MPN
APM6B0CTLN4