The Schneider APM6L0CTLY6 is the control module for the Altivar Process Modular drive family, specifically the variant for liquid-cooled systems. It handles the brains of the drive — logic, I/O, fieldbus communication — while the power stage is a separate module. Rated supply voltage is 500...690 V with a 24 V control supply, so it's built for medium-voltage industrial motors in process applications like pumps, fans, and conveyors.
Physical footprint: 510 mm high, 230 mm wide, 131 mm deep. That's a tall, narrow module — expect it to occupy a full vertical slot in a multi-drive cabinet. IP00 means no enclosure; it's designed to be mounted inside a panel that provides the actual environmental seal. Environmental tolerance is solid for a drive control module: -10 to 50 °C operating, 5-95% humidity non-condensing, and altitude up to 4800 m with derating above 1000 m. Vibration resistance at 1.5 mm peak-to-peak (2-13 Hz) and 0.5 gn (13-200 Hz) per IEC 60068-2-6 means it can handle typical industrial floor vibration without nuisance trips. EMC immunity is specified at level 3 or 4 across electrostatic discharge, radiated RF, fast transients, surges, and conducted RF per IEC 61000-4-2 through -6. That's a robust spec for noisy plant environments — level 4 on fast transients is particularly relevant for drives near contactors or welding gear.
Compliance and standards coverage
This module carries CE marking and complies with IEC 61800-3 (EMC for drive systems), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonic limits), IEC 60721-3 (environmental classification), IEC 61508 and IEC 13849-1 (functional safety), plus UL 618000-5-1. Pollution degree 2 per IEC 61800-5-1. That's a full suite for a drive destined for CE-marked machinery or UL-listed panels.