Skip to main content
Log in
Schneider Electric ATH630U75N4Z — AC Drive (VFD) 480V

Schneider ATH630U75N4Z Altivar HVAC Drive, 7.5 kW, SIL 3

MPNATH630U75N4Z
Active

Schneider Electric Altivar HVAC ATH600 series, ATH630U75N4Z, 7.5 kW heavy duty / 10 hp normal duty VFD, 380-480 V, with integrated C2 EMC filter and SIL 3 STO.

Schneider Electric ATH630U75N4Z datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATH630U75N4Z — Identification
ParameterValue
Product typeVariable speed drive
Device short nameATH630
Product range / familyAltivar HVAC ATH600
ATH630U75N4Z — Power & Output
ParameterValue
Motor power (kW)7.5 kW for normal duty 5.5 kW for heavy duty
Max. transient current17.6 A during 60 s (normal duty) 18.0 A during 60 s (heavy duty)
Apparent power9.1 kVA (normal duty) 6.9 kVA (heavy duty)
ATH630U75N4Z — Input / Supply
ParameterValue
Rated supply voltage range380...480 V - 15...10 %
Input line current12.94 A at 380 V (normal duty) 11 A at 480 V (normal duty) 9.7 A at 380 V (heavy duty) 8.3 A at 480 V (heavy duty)
Network number of phases3 phases
Internal/auxiliary suppliesExternal supply for control circuit: 24 V DC (19...30 V), Internal supply for digital inputs and STO: 24 V DC (20.4...27 V), Internal supply for reference potentiometer: 10.5 V DC +/- 5 %, <10 mA, protection type: short-circuit
ATH630U75N4Z — Control & Performance
ParameterValue
Asynchronous motor control modesVoltage/frequency ratio, 5 points Flux vector control with sensor, standard Voltage/frequency ratio - Energy Saving, quadratic U/f Flux vector control without sensor - Energy Saving Voltage/frequency ratio, 2 points
Synchronous motor control modesVector control without sensor
ATH630U75N4Z — Protection & EMC
ParameterValue
Integrated EMC filter classClass C2 EMC filter integrated
Protection functionsThermal overload protection: motor Safe torque off: motor Motor phase loss: motor Against exceeding limit speed: motor Temperature protection: drive Overheating: drive Output overcurrent between motor phase and earth: drive Output overcurrent between motor phases: drive Short-circuit between motor phase and earth: drive Short-circuit between motor phases: drive DC Bus overvoltage: drive Line supply overvoltage: drive Line supply undervoltage: drive Input supply loss: drive Break on the control circuit: drive
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Prospective short-circuit current (Isc)22 kA
ATH630U75N4Z — Mechanical & Cooling
ParameterValue
IP degree of protectionIP20
Acoustic noise level54 dB
ATH630U75N4Z — Environmental
ParameterValue
Operating ambient temperature-15...50 °C without derating 50...60 °C with derating factor
Operating altitude1000 m without derating 1000...3000 m with current derating 1 % per 100 m
Relative humidity5...95 % without condensation conforming to IEC 60068-2-3
Storage / transport temperature-40...70 °C
Pollution degree2
ATH630U75N4Z — Approvals
ParameterValue
Certifications & markingCE UKCA CULus EAC RCM ATEX WEEE ROHS KCC
Standards complianceUL 61800-5-1 EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 RoHS
ATH630U75N4Z — Communication
ParameterValue
Communication protocolsModbus serial BACnet MS/TP

Product details

The ATH630U75N4Z is a cabinet-mount variable frequency drive from the Altivar HVAC ATH600 series, sized for a 7.5 kW (10 hp) motor at normal duty or 5.5 kW (7.5 hp) at heavy duty on a 380–480 V three-phase supply. It draws 12.94 A at 380 V normal duty, 11 A at 480 V normal duty, and 9.7 A / 8.3 A respectively in heavy duty. The control circuit needs an external 24 V DC supply (19...30 V); internal supplies handle digital inputs and STO at 24 V DC (20.4...27 V).

Safety and compliance

The drive carries SIL 3 per IEC 61508 and PL = e per ISO 13849-1 for the safe torque off (STO) function. It meets UL 61800-5-1, EN/IEC 61800-3, EN/IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, and RoHS. The integrated EMC filter is Class C2. Markings include CE, UKCA, CULus, EAC, RCM, ATEX, WEEE, and KCC.

Application features

Built-in functions include fire mode, forced fire mode, PID controller with up to 3 additional PID loops, damper control, underload detection for broken belt, scroll compressor management, skipped frequencies, catch on the fly, and power monitoring. The output frequency is 0.4 kHz.

Frequently asked questions

What are the key ratings for this drive?

Motor power: 7.5 kW (10 hp) normal duty, 5.5 kW (7.5 hp) heavy duty. Line current: 12.94 A at 380 V normal duty, 11 A at 480 V normal duty. Safety: SIL 3 / PL e STO. Integrated C2 EMC filter.

What communication protocols does it support?

Built-in 2-wire RS-485 with Modbus RTU and BACnet MS/TP. Optional communication modules add BACnet IP, PROFINET, or Ethernet IP/Modbus TCP.

What compliance documentation is available?

The drive carries CE, UKCA, CULus, EAC, RCM, ATEX, WEEE, RoHS, and KCC markings. It meets UL 61800-5-1, EN/IEC 61800-3, EN/IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and ISO 13849-1.

MPN
ATH630U75N4Z