Skip to main content
Log in
Schneider Electric ATH650U22N4 — AC Drive (VFD) 480V

Schneider Electric ATH650U22N4 Altivar HVAC drive, 2.2 kW no

MPNATH650U22N4
Active

Schneider Electric Altivar HVAC ATH600, ATH650U22N4, 2.2 kW normal duty / 1.5 kW heavy duty, wall-mount VFD with integrated C2 EMC filter and SIL 3 STO.

Schneider Electric ATH650U22N4 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATH650U22N4 — Identification
ParameterValue
Product typeVariable speed drive
Device short nameATH650
Product range / familyAltivar HVAC ATH600
ATH650U22N4 — Power & Output
ParameterValue
Motor power (kW)2.2 kW for normal duty 1.5 kW for heavy duty
Max. transient current5.6 A during 60 s (normal duty) 5.6 A during 60 s (heavy duty)
Apparent power3.2 kVA (normal duty) 2.3 kVA (heavy duty)
ATH650U22N4 — Input / Supply
ParameterValue
Rated supply voltage range380...480 V - 15...10 %
Input line current4.837 A at 380 V (normal duty) 3.8 A at 480 V (normal duty) 3.5 A at 380 V (heavy duty) 2.8 A at 480 V (heavy duty)
Network number of phases3 phases
Internal/auxiliary suppliesExternal supply for control circuit: 24 V DC (19...30 V), Internal supply for digital inputs and STO: 24 V DC (20.4...27 V), Internal supply for reference potentiometer: 10.5 V DC +/- 5 %, <10 mA, protection type: short-circuit
ATH650U22N4 — Control & Performance
ParameterValue
Asynchronous motor control modesVoltage/frequency ratio, 5 points Flux vector control with sensor, standard Voltage/frequency ratio - Energy Saving, quadratic U/f Flux vector control without sensor - Energy Saving Voltage/frequency ratio, 2 points
Synchronous motor control modesVector control without sensor
ATH650U22N4 — Protection & EMC
ParameterValue
Integrated EMC filter classClass C2 EMC filter integrated
Protection functionsThermal overload protection: motor Safe torque off: motor Motor phase loss: motor Against exceeding limit speed: motor Temperature protection: drive Overheating: drive Output overcurrent between motor phase and earth: drive Output overcurrent between motor phases: drive Short-circuit between motor phase and earth: drive Short-circuit between motor phases: drive DC Bus overvoltage: drive Line supply overvoltage: drive Line supply undervoltage: drive Input supply loss: drive Break on the control circuit: drive
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Prospective short-circuit current (Isc)5 kA
ATH650U22N4 — Mechanical & Cooling
ParameterValue
IP degree of protectionIP55 Type 12
Acoustic noise level47 dB
ATH650U22N4 — Environmental
ParameterValue
Operating ambient temperature-15...40 °C without derating 40...50 °C with derating factor
Operating altitude1000 m without derating 1000...3000 m with current derating 1 % per 100 m
Relative humidity5...95 % without condensation conforming to IEC 60068-2-3
Storage / transport temperature-40...70 °C
Pollution degree2
ATH650U22N4 — Approvals
ParameterValue
Certifications & markingCE UKCA CULus EAC RCM ATEX WEEE ROHS KCC
Standards complianceUL 61800-5-1 EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 RoHS
ATH650U22N4 — Communication
ParameterValue
Communication protocolsModbus serial BACnet MS/TP

Product details

The Schneider Electric ATH650U22N4 is a current-production Altivar HVAC ATH600 drive sized for 2.2 kW (3 hp) normal duty or 1.5 kW (2 hp) heavy duty on a 380–480 V three-phase supply. Line current pulls 4.837 A at 380 V normal duty, 3.8 A at 480 V normal duty; heavy-duty figures drop to 3.5 A and 2.8 A respectively. Built for HVAC applications — fire mode, forced fire mode, PID controller, damper control, scroll compressor management, and broken-belt detection are available functions. The integrated Class C2 EMC filter meets EN/IEC 61800-3 conducted emission limits for second-environment (industrial) installations without an external filter. Safety integration is straightforward: the drive includes a Safe Torque Off (STO) function certified SIL 3 per IEC 61508 and PL e per ISO 13849-1, meeting the highest performance level for machine safety without an external safety relay.

Fieldbus connectivity via a 2-wire RS-485 physical interface supporting Modbus RTU and BACnet MS/TP at selectable baud rates (4800 to 76.8 kbit/s). Optional plug-in communication modules add PROFINET, Ethernet IP/Modbus TCP, or BACnet IP. Relay outputs R1 (1 NO + 1 NC) and R2/R3 (1 NO each) are rated for 100,000 electrical cycles.

Frequently asked questions

What compliance documentation is available for this drive?

The drive carries CE, UKCA, cULus, EAC, RCM, ATEX, WEEE, RoHS, and KCC markings. It is designed to UL 61800-5-1, EN/IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and ISO 13849-1.

What are the key functional ratings of the ATH650U22N4?

Motor power: 2.2 kW (3 hp) normal duty, 1.5 kW (2 hp) heavy duty. Line current: 4.837 A at 380 V normal duty, 3.8 A at 480 V normal duty. Apparent power: 3.2 kVA normal duty, 2.3 kVA heavy duty. Output frequency: 0.4 kHz.

What safety functions does this drive include?

Safe Torque Off (STO) certified SIL 3 per IEC 61508 and PL e per ISO 13849-1.

MPN
ATH650U22N4