11286 kW motor power, 13500 kVA apparent power
The Schneider Electric ATV1200A135001010 is an Altivar 1200 AC drive rated for 11286 kW motor power and 13500 kVA apparent power, supplied from a 2970…3630 V line via a 48-pulse diode rectifier bridge. That 48-pulse topology keeps input harmonics low enough to avoid a separate filter on most utility feeds — the integrated EMC filter handles the rest. Overload capability is specified at 1.2 In for 60 s and 1.5 In for 3 s under standard overload, with a high-overload profile reaching 1.5 In for 60 s and 1.85 In for 3 s. This means the drive can ride through short-duration load spikes without tripping, which matters for crushers, mills, or conveyors that see intermittent peak torque.
Floor-standing enclosure with separate air flows
The drive ships in a floor-standing enclosure with separate air flows for the power section and control compartment — the forced-convection cooling moves 160000 m³/h (standard efficiency). The physical footprint is substantial: 3040 mm high, 15680 mm wide, 1700 mm deep. Plan for a dedicated equipment room or outdoor shelter with adequate ventilation; the noise level at full fan speed is 80 dB. The enclosure colour is grey (RAL 7032). Electrical connection uses M10 screw-type bars with a clamping capacity of 6 x 40 mm² for the line input (/R, /S, L3/T), entry from the top or bottom.
Active production, quoted to order
The drive is CE marked and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. Electrical isolation between power and control circuits is standard, with a dielectric strength of 28 kV AC between earth and power terminals.