Skip to main content
Schneider Electric ATV1200A44706363

Schneider Electric ATV1200A44706363 Altivar 1200 MV Drive

MPN ATV1200A44706363
Active

Schneider Electric Altivar 1200 ATV1200A44706363 medium-voltage variable speed drive, 3545 kW, 2970–3630 V supply, 36-pulse diode rectifier, floor-standing enclosure, CE.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A44706363 specifications
ParameterValue
Input type36 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current410 A
IP ratingIP41 / IP42 / IP31
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1700 mm (standard efficiency) 1800 mm (high efficiency)
Width6670 mm (standard efficiency) 6970 mm (high efficiency)
Height2740 mm high efficiency 2740 mm standard efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

3545 kW medium-voltage drive — what it is

The ATV1200A44706363 is a Schneider Electric Altivar 1200 medium-voltage variable speed drive rated for 3545 kW motor power, with a supply voltage range of 2970 to 3630 V. It uses a 36-pulse diode rectifier bridge input stage, which reduces line current harmonics below IEEE 519 thresholds without an external filter. The drive is assembled in a floor-standing enclosure with separate air flows for power and control sections, and forced convection cooling moves 49,800 m³/h of air through the cabinet.

Electrical ratings and overload capability

Line current is 410 A with an apparent power rating of 4240 kVA, and the drive withstands 1.2× In for 60 seconds under standard overload or 1.5× In for 3 seconds — enough for starting high-inertia loads like large fans or centrifugal pumps. The prospective line short-circuit current rating is 31.5 kA for 150 ms, so the drive coordinates with upstream MV switchgear without requiring additional current-limiting reactors in most installations. Output voltage is limited to the supply voltage level, and the drive supports both synchronous and asynchronous motors — common for retrofit or new-build MV motor control.

Physical footprint and site integration

Operating altitude is 1000 to 2000 m with a 0.6 % current derating per 100 m above 1000 m — factor this into the motor full-load current if the installation is at elevation. The enclosure is grey RAL 7032, the operating position is vertical ±10°, and the vibration resistance is 4.9 m/s² at 10–50 Hz, which suits typical industrial floor conditions.

Standards, approvals, and lifecycle

The drive carries CE marking and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3 (EMC), EN/IEC 61800-4, and EN/IEC 61800-5-1 — covering electrical safety, EMC, and functional safety for adjustable-speed drives. Electrical isolation between power and control circuits is provided, with a dielectric strength of 20 kV AC between earth and power terminals, and overvoltage category II per EN/IEC 61800-5-1.

MPN
ATV1200A44706363