Skip to main content
Schneider Electric ATV1200A4701010

Schneider ATV1200A4701010 Altivar 1200 Drive, 393 kW, 3.3 kV

MPN ATV1200A4701010
Active

Schneider Electric Altivar 1200 ATV1200A4701010 medium-voltage variable speed drive, 393 kW / 470 kVA, 2970-3630 V supply, 48-pulse diode rectifier, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A4701010 specifications
ParameterValue
Input type48 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current35 A
IP ratingIP42 / IP31 / IP41
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1600 mm (standard efficiency)
Width3960 mm (standard efficiency)
Height2670 mm standard efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

Medium-voltage drive for large asynchronous motors

The ATV1200A4701010 is a Schneider Electric Altivar 1200 medium-voltage variable speed drive rated for 393 kW motor power at 470 kVA apparent power, supplied from a 2970-3630 V AC line through a 48-pulse diode rectifier bridge. It is built as a floor-standing enclosure with separate air flows for the power cells and transformer section, and includes an integrated EMC filter and forced convection cooling moving 19,800 m³/h of air at standard efficiency.

Overload capability and fault withstand

Standard overload rating allows 1.2× rated current for 60 seconds and 1.5× for 3 seconds; the high overload profile pushes to 1.5× for 60 seconds and 1.85× for 3 seconds — this matters for sizing the drive to a load profile that includes brief peak torque demands. The drive can withstand a prospective line short-circuit current of 31.5 kA for 150 ms, and the dielectric strength between power terminals and earth is tested at 28 kV AC.

CE marked and designed to EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1, covering electrical safety, EMC, and enclosure protection. Pollution degree 2 per EN/IEC 61800-5-1 and overvoltage category II — suitable for typical industrial environments with non-conductive pollution and transient overvoltages within the distribution network.

Physical layout and integration

The enclosure measures 3960 mm wide, 2670 mm high, and 1600 mm deep — a substantial footprint that requires a dedicated equipment room with adequate floor loading and overhead clearance for crane or forklift placement. Operating position is vertical within ±10 degrees, and the drive is rated for altitudes from 1000 to 2000 m with a 0.6 % current derating per 100 m above 1000 m.

MPN
ATV1200A4701010