Skip to main content
Schneider Electric ATV212HD30N4LCD

Schneider ATV212HD30N4LCD AC Drive, 30 kW / 40 hp, 480 V

MPN ATV212HD30N4LCD
Obsolete

Schneider Electric Altivar 212 series, ATV212HD30N4LCD AC drive, 30 kW / 40 hp, 480 V, 44.7 A line current, integrated Class C2 EMC filter, IP20, 240 x 420 x 214 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV212HD30N4LCD specifications
ParameterValue
Connector type1 open style 1 RJ45
Main product or component typeVariable speed drive
Voltage= 1 mOhm 500 V DC for 1 minute
Current44.7 A at 480 V 56.7 A at 380 V
Horsepower40 hp
Frequency50...60 Hz - 5...5 %
Temp storage max70 °C
Temp storage min-25 °C
Temp operating max50 °C
Temp operating min-10 °C
Storage temperature-25...70 °C
Pollution degree3 conforming to IEC 61800-5-1
Depth214 mm
Width240 mm
Height420 mm
Data format8 bits, 1 stop, odd even or no configurable parity
Operating positionVertical +/- 10 degree

Product details

30 kW / 40 hp at 480 V — what the ratings mean for your motor

The ATV212HD30N4LCD is a 30 kW (40 hp) AC drive from the Altivar 212 series, designed for asynchronous motors. At 480 V supply it draws 44.7 A line current; at 380 V the draw is 56.7 A — the higher current at lower voltage reflects the constant-power region of the drive's output. The integrated Class C2 EMC filter means this drive meets the conducted emission limits for industrial environments (IEC 61800-3 environment 1, category C2) without an external filter — a panel-space and installation-cost saving for most factory-floor applications.

Lifecycle and sourcing — mature, not obsolete

Sourced to order against your BOM quantity through independent distribution. Availability and current pricing confirmed at RFQ — no stock-holding claim, no lead-time number here.

Panel fit and mounting constraints

Dimensions are 240 mm wide, 420 mm high, 214 mm deep — a vertical +/-10° mounting position is specified, with the heat sink on the back. The drive moves 290 m³/h of air through the heatsink; leave the manufacturer's recommended clearance above and below for airflow. Operating altitude is 1000 m without derating; above that, derate 1 % per 100 m up to 3000 m, with a 2000 m limit for corner-grounded distribution networks.

Protection coverage and fieldbus

The drive includes thermal protection for both the drive power stage and the motor (with PTC probe input), short-circuit protection between motor phases and to earth, input phase loss detection, and DC bus overvoltage/undervoltage monitoring — all listed in the protection type set. On the communication side, a 2-wire RS 485 port with Modbus RTU protocol is standard (9600 or 19200 bps, 1–247 addresses). An optional LonWorks communication card is listed as an option card.

MPN
ATV212HD30N4LCD