Skip to main content
Log in
Schneider Electric ATV212HD45N4 — AC Drive (VFD) 480V

Schneider Electric ATV212HD45N4 AC Drive (VFD) 480V, 45 kW

MPNATV212HD45N4
Active

Schneider Electric Altivar 212 ATV212HD45N4 AC drive (VFD), 45 kW, 3-phase 480 V, integrated Class C2 EMC filter, CE marked, 9.6 in depth.

$3,120.39 – $7,157.10Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV212HD45N4 — Identification
ParameterValue
Product typeVariable speed drive
Device short nameATV212
Product range / familyAltivar 212
ATV212HD45N4 — Power & Output
ParameterValue
Motor power (kW)45 kW
Continuous output current94 A 380 V 94 A 460 V
Max. transient current103.4 A 60 s
Apparent power61.9 kVA 380 V
ATV212HD45N4 — Input / Supply
ParameterValue
Rated supply voltage range380...480 V - 15...10 %
Input line current83.8 A 380 V 65.9 A 480 V
ATV212HD45N4 — Control & Performance
ParameterValue
Output frequency range0.5...200 Hz
Asynchronous motor control modesVoltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, 2 points Voltage/frequency ratio, 5 points Flux vector control without sensor, standard
ATV212HD45N4 — Protection & EMC
ParameterValue
Integrated EMC filter classClass C2 EMC filter integrated
Protection functionsOverheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control circuit drive Against exceeding limit speed drive Line supply overvoltage and undervoltage drive Line supply undervoltage drive Against input phase loss drive Thermal protection motor Motor phase break motor With PTC probes motor
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Prospective short-circuit current (Isc)22 kA
ATV212HD45N4 — Mechanical & Cooling
ParameterValue
IP degree of protectionIP21
Acoustic noise level64 dB 86/188/EEC
Assembly / installation styleWith heat sink
ATV212HD45N4 — Environmental
ParameterValue
Operating ambient temperature14...104 °F (-10...40 °C) (without derating) 104...122 °F (40...50 °C) (with derating factor)
Operating altitude3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 3280.84 ft (1000 m) without derating
Relative humidity5...95 % without condensation IEC 60068-2-3 5...95 % without dripping water IEC 60068-2-3
Storage / transport temperature-13...158 °F (-25...70 °C)
Pollution degree3 IEC 61800-5-1
Vibration resistance1.5 mm (f= 3...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8
ATV212HD45N4 — Approvals
ParameterValue
Certifications & markingCE
Standards complianceIEC 61800-3 IEC 61800-3 environments 1 category C3 IEC 61800-3 environments 1 category C1 IEC 61800-3 environments 1 category C3 EN 61800-3 category C3 IEC 61800-3 environments 2 category C3 EN 55011 class A group 1 IEC 61800-5-1 IEC 61800-3 environments 2 category C1 IEC 61800-5-1 IEC 61800-3 environments 2 category C3 IEC 61800-3 category C2 IEC 61800-3 category C2 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 2 category C2 IEC 61800-3 IEC 61800-3 environments 1 category C1 IEC 61800-3 environments 2 category C1 IEC 61800-3 environments 2 category C2 IEC 61800-3 category C3 UL Type 1
ATV212HD45N4 — Communication
ParameterValue
Communication protocolsModbus LonWorks METASYS N2 BACnet APOGEE FLN

Product details

Panel fit and power delivery

The ATV212HD45N4 is a 45 kW variable speed drive from the Altivar 212 range, designed for three-phase 480 V input with a line current of 65.9 A at 480 V. Dimensions are 21.7 in high, 9.4 in wide, and 9.6 in deep, with a vertical mounting orientation (+/- 10 degrees) and a heatsink for thermal management. Airflow is rated at 429 m³/h, and the drive includes overheating protection, short-circuit protection between motor phases, and overcurrent protection between output phases and earth.

EMC and compliance profile

An integrated Class C2 EMC filter is built in, covering conducted and radiated emissions per IEC 61800-3 category C2 for environments 1 and 2.

Frequently asked questions

What is the motor power rating of the ATV212HD45N4?

The drive is rated for 45 kW motor power at 480 V, three-phase input, with a line current of 65.9 A at 480 V.

What EMC filter is integrated into the ATV212HD45N4?

It includes an integrated Class C2 EMC filter per IEC 61800-3, suitable for industrial environments with conducted and radiated emission limits.

MPN
ATV212HD45N4