Skip to main content
Log in
Schneider Electric ATV212WD22N4 — AC Drive (VFD) 480V

Schneider ATV212WD22N4 AC Drive (VFD) 480V, 22 kW

MPNATV212WD22N4
Active

Schneider Electric Altivar 212 ATV212WD22N4 AC Drive (VFD) 480V, 22 kW, 33.1 A at 480 V, 3-phase, 28.3 x 11.2 x 12.4 in, integrated C2 EMC filter.

$2,174.24 – $6,192.16Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV212WD22N4 — Identification
ParameterValue
Product typeVariable speed drive
Device short nameATV212
Product range / familyAltivar 212
ATV212WD22N4 — Power & Output
ParameterValue
Motor power (kW)22 kW
Continuous output current43.5 A 380 V 43.5 A 460 V
Max. transient current47.9 A 60 s
Apparent power33.2 kVA 380 V
ATV212WD22N4 — Input / Supply
ParameterValue
Rated supply voltage range380...480 V - 15...10 %
Input line current33.1 A 480 V 41.6 A 380 V
ATV212WD22N4 — Control & Performance
ParameterValue
Output frequency range0.5...200 Hz
Asynchronous motor control modesVoltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, 5 points Flux vector control without sensor, standard Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Voltage/frequency ratio, 2 points
ATV212WD22N4 — Protection & EMC
ParameterValue
Integrated EMC filter classClass C2 EMC filter integrated
Protection functionsOverheating protection drive Thermal power stage drive Short-circuit between motor phases drive Input phase breaks drive Overcurrent between output phases and earth drive Overvoltages on the DC bus drive Break on the control circuit drive Against exceeding limit speed drive Line supply overvoltage and undervoltage drive Line supply undervoltage drive Against input phase loss drive Thermal protection motor Motor phase break motor With PTC probes motor
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Prospective short-circuit current (Isc)22 kA
ATV212WD22N4 — Mechanical & Cooling
ParameterValue
IP degree of protectionIP55
Acoustic noise level59.9 dB 86/188/EEC
Assembly / installation styleWith heat sink
ATV212WD22N4 — Environmental
ParameterValue
Operating ambient temperature14...104 °F (-10...40 °C) (without derating) 104...122 °F (40...50 °C) (with derating factor)
Operating altitude3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 3280.84 ft (1000 m) without derating
Relative humidity5...95 % without condensation IEC 60068-2-3 5...95 % without dripping water IEC 60068-2-3
Storage / transport temperature-13...158 °F (-25...70 °C)
Pollution degree3 IEC 61800-5-1
Vibration resistance1.5 mm (f= 3...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8
ATV212WD22N4 — Approvals
ParameterValue
Certifications & markingCE
Standards complianceIEC 61800-5-1 IEC 61800-3 environments 1 category C1 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 1 category C3 IEC 61800-3 environments 2 category C1 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 2 category C3 CE UL CSA C-Tick N1831 GOST
ATV212WD22N4 — Communication
ParameterValue
Communication protocolsMETASYS N2 LonWorks BACnet APOGEE FLN Modbus

Product details

22 kW Altivar 212 drive — panel fit and load match

The ATV212WD22N4 is a 22 kW AC drive from the Altivar 212 series, designed for asynchronous motors in 3-phase 480 V installations. It draws 33.1 A at 480 V and 41.6 A at 380 V line current, so the upstream protection and cable sizing should be specced for the higher 380 V figure if the supply could land there. The drive carries an integrated Class C2 EMC filter, which covers most industrial environments (IEC 61800-3 environments 1 and 2, category C2) without an external filter box. That saves a DIN-rail slot and a wiring step. Physical footprint is 28.3 in high by 11.2 in wide by 12.4 in deep — a tall, narrow enclosure that fits a standard 800 mm cabinet depth. Mount it vertically within ±10° for the heatsink to work as designed.

Mature lifecycle — sourcing posture

Sourced to order against the BOM quantity through independent distribution.

Compliance and approvals stack

The drive carries CE, UL, CSA, C-Tick, and GOST markings, and meets IEC 61800-5-1 for safety and IEC 61800-3 for EMC across environments 1 and 2, categories C1 through C3. Pollution degree 3 per IEC 61800-5-1 means it tolerates conductive dust and humidity in industrial panels. Protection includes thermal power stage monitoring, short-circuit between motor phases, overcurrent between output phases and earth, DC bus overvoltage, input phase loss, and motor thermal protection with PTC probe support.

Frequently asked questions

What is ATV212WD22N4's line current rating?

The drive draws 33.1 A at 480 V and 41.6 A at 380 V line current. Size upstream protection for the higher 380 V figure.

What compliance documentation does Schneider provide for ATV212WD22N4?

The drive is CE, UL, CSA, C-Tick, and GOST certified, meeting IEC 61800-5-1 safety and IEC 61800-3 EMC standards across environments 1 and 2, categories C1 through C3.

How can I order ATV212WD22N4 or check availability?

This drive is sourced to order against the BOM quantity through independent distribution.

MPN
ATV212WD22N4