Skip to main content
Log in
Schneider Electric ATV212WD45N4CZH28 — AC Drive (VFD) 480V

Schneider ATV212WD45N4CZH28 AC Drive, 45 kW, 60 hp, 480 V

MPNATV212WD45N4CZH28
Obsolete

Schneider Electric Altivar 212 ATV212WD45N4CZH28 AC drive, 45 kW / 60 hp, 480 V, IP20, with integrated Class C1 EMC filter, RS-485 Modbus.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ATV212WD45N4CZH28 — Identification
ParameterValue
Product typeVariable speed drive
Device short nameATV212
Product range / familyAltivar 212
ATV212WD45N4CZH28 — Power & Output
ParameterValue
Motor power (kW)45 kW
Continuous output current94 A at 380 V 94 A at 460 V
Max. transient current103.4 A for 60 s
Apparent power61.9 kVA at 380 V
ATV212WD45N4CZH28 — Input / Supply
ParameterValue
Rated supply voltage range380...480 V - 15...10 %
Input line current83.8 A at 380 V 65.9 A at 480 V
Network number of phases3 phases
ATV212WD45N4CZH28 — Control & Performance
ParameterValue
Output frequency range0.5...200 Hz
Asynchronous motor control modesVoltage/frequency ratio, 5 points Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Voltage/frequency ratio - Energy Saving, quadratic U/f Flux vector control without sensor, standard Voltage/frequency ratio, 2 points
ATV212WD45N4CZH28 — Protection & EMC
ParameterValue
Integrated EMC filter classClass C1 EMC filter integrated
Protection functionsOverheating protection: drive Thermal power stage: drive Short-circuit between motor phases: drive Input phase breaks: drive Overcurrent between output phases and earth: drive Overvoltages on the DC bus: drive Break on the control circuit: drive Against exceeding limit speed: drive Line supply overvoltage and undervoltage: drive Line supply undervoltage: drive Against input phase loss: drive Thermal protection: motor Motor phase break: motor With PTC probes: motor
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Prospective short-circuit current (Isc)22 kA
ATV212WD45N4CZH28 — Mechanical & Cooling
ParameterValue
IP degree of protectionIP54 conforming to EN/IEC 61800-5-1 IP54 conforming to EN/IEC 60529
Acoustic noise level64 dB conforming to 86/188/EEC
Assembly / installation styleWith heat sink
ATV212WD45N4CZH28 — Environmental
ParameterValue
Operating ambient temperature-10...40 °C (without derating) 40...50 °C (with derating factor)
Operating altitude1000...3000 m limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 1000 m without derating
Relative humidity5...95 % without condensation conforming to IEC 60068-2-3 5...95 % without dripping water conforming to IEC 60068-2-3
Storage / transport temperature-25...70 °C
Pollution degree3 conforming to IEC 61800-5-1
Vibration resistance1.5 mm (f= 3...13 Hz) conforming to EN/IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to EN/IEC 60068-2-8
ATV212WD45N4CZH28 — Approvals
ParameterValue
Certifications & markingCE
Standards complianceEN 61800-5-1 IEC 61800-3 environments 2 category C3 EN 61800-3 environments 1 category C2 EN 61800-3 environments 2 category C1 IEC 61800-3 environments 1 category C3 IEC 61800-5-1 EN 61800-3 environments 1 category C3 EN 61800-3 EN 61800-3 environments 2 category C2 IEC 61800-3 category C1 IEC 61800-3 IEC 61800-3 environments 1 category C1 IEC 61800-3 environments 2 category C2 EN 61800-3 environments 1 category C1 EN 61800-3 category C1 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 2 category C1 EN 61800-3 environments 2 category C3 EN 55011 group 1 class B
ATV212WD45N4CZH28 — Communication
ParameterValue
Communication protocolsModbus LonWorks BACnet METASYS N2 APOGEE FLN

Product details

45 kW / 60 hp Altivar 212 drive for asynchronous motors

The ATV212WD45N4CZH28 is a 45 kW (60 hp) AC drive from the Schneider Electric Altivar 212 series, designed for variable-speed control of asynchronous motors on 480 V three-phase supplies. Line current draw is 83.8 A at 380 V and 65.9 A at 480 V, with an apparent power rating of 61.9 kVA at 380 V.

Switching frequency and derating

The switching frequency is adjustable from 6 to 16 kHz; operating above 8 kHz requires a derating factor, so a 16 kHz setting reduces the continuous output current capacity. An integrated Class C1 EMC filter meets EN 55011 Group 1 Class B conducted emissions, which simplifies panel compliance for residential and light-industrial environments.

Protection coverage and communication

The drive includes built-in protection against motor and drive overheating, short-circuit between motor phases, input phase loss, DC bus overvoltage, and motor phase break, plus PTC probe input for motor thermal protection. Communication is via a 2-wire RS-485 Modbus RTU interface (9600 or 19200 bps, configurable parity), with an optional LonWorks communication card available.

Lifecycle and sourcing

Physical dimensions are 880 mm high, 284 mm wide, and 343 mm deep, with a vertical mounting position (+/- 10 degrees). The assembly includes a heat sink for natural convection cooling.

Frequently asked questions

What compliance documentation does Schneider provide for ATV212WD45N4CZH28?

The drive carries CE marking and complies with EN 61800-5-1, IEC 61800-3 (environments 1 and 2, categories C1 to C3), and EN 55011 Group 1 Class B. The integrated Class C1 EMC filter is included.

How can I order ATV212WD45N4CZH28 or check availability?

This drive is sourced to order through independent distribution. Submit an RFQ for current pricing and lead time; availability is confirmed at quote time.

MPN
ATV212WD45N4CZH28