Skip to main content
Schneider Electric ATV21WD75N4

Schneider Electric ATV21WD75N4 AC Drive, 75 kW, 380-480 V

MPN ATV21WD75N4
Obsolete

Schneider Electric Altivar 21 ATV21WD75N4 AC drive, 75 kW, 380-480 V, 3-phase, 111.3 A line current at 480 V, integrated Class A EMC filter, CE marked.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV21WD75N4 specifications
ParameterValue
Connector type1 RJ45
Main product or component typeVariable speed drive
Voltage= 1 mOhm 500 V DC for 1 minute
Current111.3 A 480 V 141.8 A 380 V
Phases3-phase
IP ratingIP54
Temp storage max70 °C
Temp storage min-25 °C
Temp operating max40 °C
Temp operating min-10 °C
Storage temperature-13...158 °F (-25...70 °C)
Pollution degree3 IEC 61800-5-1
Depth14.3 in (364 mm)
Width14.3 in (362 mm)
Height39.4 in (1000 mm)
Operating positionVertical +/- 10 degree

Product details

75 kW VFD for asynchronous motors — 380-480 V, 3-phase

The ATV21WD75N4 is a 75 kW Altivar 21 AC drive designed for three-phase asynchronous motors, supplied from a 380-480 V three-phase line. It delivers 111.3 A line current at 480 V (141.8 A at 380 V) and integrates a Class A EMC filter, simplifying panel compliance with EN 55011 Class A Group 1.

Switching frequency and torque capability

The adjustable switching frequency ranges from 6 to 16 kHz; above 8 kHz a derating factor applies, so for quiet motor operation at 16 kHz the continuous output current must be reduced. Transient overtorque is rated at 120 % of nominal motor torque for 60 seconds, which handles short-duration load spikes on conveyors or pumps without oversizing the drive.

Physical footprint and mounting

The drive measures 39.4 in (1000 mm) high by 14.3 in (362 mm) wide by 14.3 in (364 mm) deep, with an integrated heatsink. It mounts vertically within ±10 degrees — the height demands a tall enclosure, and the heatsink requires clearance for airflow. Pollution degree 3 per IEC 61800-5-1 means it tolerates conductive dust in industrial environments.

Standards and compliance documentation

CE marked, the drive complies with IEC 61800-5-1 (safety), IEC 61800-3 (EMC environments 1 and 2, categories C1 through C3), and EN 55011 Class A Group 1. The integrated EMC filter covers conducted emissions for most industrial installations; for category C2 (residential) an external filter may be needed. Dielectric strength is 3535 V DC between earth and power terminals, 5092 V DC between control and power terminals.

MPN
ATV21WD75N4