Skip to main content
Log in
Schneider Electric ATV32HD15N4437 — AC Drive (VFD) 480V

Schneider ATV32HD15N4437 Altivar 32 Drive, 15 kW, 20 hp, 380

MPNATV32HD15N4437
Obsolete

Schneider Electric Altivar 32, ATV32HD15N4437, variable speed drive, 15 kW / 20 hp, 380...480 V, integrated C2 EMC filter.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ATV32HD15N4437 — Identification
ParameterValue
Product typeVariable speed drive
Product range / familyAltivar 32
ATV32HD15N4437 — Power & Output
ParameterValue
Motor power (kW)15 kW at 380...480 V
Max. transient current49.5 A for 60 s 15 kW / 20 hp
Apparent power41 kVA at 500 V 3 phases 15 kW / 20 hp
ATV32HD15N4437 — Input / Supply
ParameterValue
Rated supply voltage range380...500 V - 15...10 %
Input line current33.3 A for 500 V 3 phases 15 kW / 20 hp 47.3 A for 380 V 3 phases 15 kW / 20 hp
Network number of phases3 phases
Internal/auxiliary suppliesInternal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
ATV32HD15N4437 — Control & Performance
ParameterValue
Asynchronous motor control modesFlux vector control without sensor, standard Voltage/frequency ratio, 2 points Flux vector control without sensor - Energy Saving, NoLoad law Voltage/frequency ratio, 5 points Voltage/frequency ratio - Energy Saving, quadratic U/f
Synchronous motor control modesVector control without sensor
ATV32HD15N4437 — Protection & EMC
ParameterValue
Integrated EMC filter classClass C2 EMC filter integrated
Protection functionsInput phase breaks: drive Overcurrent between output phases and earth: drive Overheating protection: drive Short-circuit between motor phases: drive Thermal protection: drive
EMC immunity tests1.2/50 µs - 8/20 µs surge immunity test, level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test, level 3 conforming to IEC 61000-4-6 Electrical fast transient/burst immunity test, level 4 conforming to IEC 61000-4-4 Electrostatic discharge immunity test, level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test, level 3 conforming to IEC 61000-4-3 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Prospective short-circuit current (Isc)22 kA for 3 phases
ATV32HD15N4437 — Mechanical & Cooling
ParameterValue
IP degree of protectionIP20 conforming to EN/IEC 61800-5-1
Acoustic noise level43 dB conforming to 86/188/EEC
Assembly / installation styleWith heat sink
ATV32HD15N4437 — Environmental
ParameterValue
Operating ambient temperature-10...50 °C without derating 50...60 °C with derating factor
Operating altitude1000...3000 m with current derating 1 % per 100 m
Relative humidity5...95 % without condensation conforming to IEC 60068-2-3 5...95 % without dripping water conforming to IEC 60068-2-3
Storage / transport temperature-25...70 °C
Pollution degree2 conforming to EN/IEC 61800-5-1
Vibration resistance1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
ATV32HD15N4437 — Approvals
ParameterValue
Certifications & markingCE
Standards complianceEN/IEC 61800-3 EN 55011 class A group 1 EN 61800-3 environments 1 category C2 EN/IEC 61800-5-1 EN 61800-3 environments 2 category C2
ATV32HD15N4437 — Communication
ParameterValue
Communication protocolsCANopen Modbus

Product details

The Schneider Electric ATV32HD15N4437 is an Altivar 32 variable speed drive rated for 15 kW / 20 hp at 380 to 480 V three-phase input. It carries an integrated Class C2 EMC filter, meeting EN 55011 Class A Group 1 and EN 61800-3 environment categories C1 and C2, which simplifies panel compliance for most industrial installations.

Ratings and capability

Output frequency range is 0.0005 to 0.599 kHz, covering standard induction motor speed control down to fractional Hz. Line current at 380 V is 47.3 A; at 500 V it draws 33.3 A. Braking torque reaches up to 170 % with an external braking resistor, suitable for moderate deceleration or vertical loads. An adjustable PID regulator is built in for closed-loop process control (pressure, flow, level) without an external controller. Analog inputs sample at 2 ms with accuracy within ±0.2 % over the -10 to 60 °C operating range.

The drive measures 404 mm high, 180 mm wide, and 232 mm deep, with a heat sink for convection cooling. Panel layout should account for the 232 mm depth plus clearance for cabling and airflow.

Frequently asked questions

What compliance documentation is available for the ATV32HD15N4437?

The drive is CE marked and conforms to EN/IEC 61800-3, EN 55011 Class A Group 1, and EN/IEC 61800-5-1. Full declarations of conformity are available from Schneider Electric.

What are the physical dimensions of the ATV32HD15N4437?

Height is 404 mm, width is 180 mm, and depth is 232 mm.

MPN
ATV32HD15N4437