Skip to main content
Log in
Schneider Electric ATV32HU75N4158 — AC Drive (VFD) 480V

Schneider ATV32HU75N4158 Altivar 32 Drive, 7.5 kW, 10 hp

MPNATV32HU75N4158
Obsolete

Schneider Electric Altivar 32, ATV32HU75N4158, 7.5 kW / 10 hp variable speed drive, 380-480 V three-phase, integrated C2 EMC filter.

Schneider Electric ATV32HU75N4158 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ATV32HU75N4158 — Identification
ParameterValue
Product typeVariable speed drive
Product range / familyAltivar 32
ATV32HU75N4158 — Power & Output
ParameterValue
Motor power (kW)7.5 kW at 380...480 V
Max. transient current25.5 A for 60 s 7.5 kW / 10 hp
Apparent power22.9 kVA at 500 V 3 phases 7.5 kW / 15 hp
ATV32HU75N4158 — Input / Supply
ParameterValue
Rated supply voltage range380...500 V - 15...10 %
Input line current18.7 A for 500 V 3 phases 7.5 kW / 10 hp 26.5 A for 380 V 3 phases 7.5 kW / 10 hp
Network number of phases3 phases
Internal/auxiliary suppliesInternal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
ATV32HU75N4158 — Control & Performance
ParameterValue
Asynchronous motor control modesFlux vector control without sensor - Energy Saving, NoLoad law Voltage/frequency ratio, 5 points Flux vector control without sensor, standard Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, 2 points
Synchronous motor control modesVector control without sensor
ATV32HU75N4158 — Protection & EMC
ParameterValue
Integrated EMC filter classClass C2 EMC filter integrated
Protection functionsInput phase breaks: drive Overcurrent between output phases and earth: drive Overheating protection: drive Short-circuit between motor phases: drive Thermal protection: drive
EMC immunity tests1.2/50 µs - 8/20 µs surge immunity test, level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test, level 3 conforming to IEC 61000-4-6 Electrical fast transient/burst immunity test, level 4 conforming to IEC 61000-4-4 Electrostatic discharge immunity test, level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test, level 3 conforming to IEC 61000-4-3 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Prospective short-circuit current (Isc)22 kA for 3 phases
ATV32HU75N4158 — Mechanical & Cooling
ParameterValue
IP degree of protectionIP20 conforming to EN/IEC 61800-5-1
Acoustic noise level43 dB conforming to 86/188/EEC
Assembly / installation styleWith heat sink
ATV32HU75N4158 — Environmental
ParameterValue
Operating ambient temperature-10...50 °C without derating 50...60 °C with derating factor
Operating altitude1000...3000 m with current derating 1 % per 100 m
Relative humidity5...95 % without condensation conforming to IEC 60068-2-3 5...95 % without dripping water conforming to IEC 60068-2-3
Storage / transport temperature-25...70 °C
Pollution degree2 conforming to EN/IEC 61800-5-1
Vibration resistance1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
ATV32HU75N4158 — Approvals
ParameterValue
Certifications & markingCE
Standards complianceEN 61800-3 environments 1 category C2 EN/IEC 61800-3 EN 55011 class A group 1 EN/IEC 61800-5-1 EN 61800-3 environments 2 category C2
ATV32HU75N4158 — Communication
ParameterValue
Communication protocolsModbus CANopen

Product details

The ATV32HU75N4158: Line current draws 26.5 A at 380 V and 18.7 A at 500 V for the 7.5 kW rating. Output frequency spans 0.0005 to 0.599 kHz, which covers standard induction motor speed ranges. The drive includes an adjustable PID regulator for closed-loop process control and delivers braking torque up to 170 % with an external braking resistor.

Protection and compliance

Protection covers input phase breaks, overcurrent between phases and earth, overheating, short-circuit between motor phases, and thermal protection. The unit is CE marked and complies with EN 61800-3, EN/IEC 61800-5-1, and EN 55011 class A group 1. Pollution degree 2 per EN/IEC 61800-5-1.

Dimensions are 308 mm high, 150 mm wide, 232 mm deep. Assembly is with a heat sink for natural convection cooling. The front face carries one RJ45 connector for Modbus or CANopen. Option cards are available for CANopen daisy chain, DeviceNet, EtherNet/IP, and Profibus DP V1. Control terminals torque to 0.5 N·m; power and motor terminals torque to 1.2 N·m.

Frequently asked questions

What are the key power ratings?

The drive is rated for 7.5 kW / 10 hp at 380-480 V three-phase. Line current is 26.5 A at 380 V and 18.7 A at 500 V.

What EMC filter is integrated?

A class C2 EMC filter is integrated, meeting EN 61800-3 environments 1 and 2 category C2.

What fieldbus options are available?

The drive has a built-in RJ45 for Modbus or CANopen. Option cards add CANopen daisy chain, DeviceNet, EtherNet/IP, or Profibus DP V1.

What are the mounting dimensions?

308 mm high, 150 mm wide, 232 mm deep. It is a heat-sink chassis mount.

MPN
ATV32HU75N4158