Skip to main content
Log in
Schneider Electric ATV350U15N4FS — AC Drive (VFD) 480V

Schneider ATV350U15N4FS Altivar Machine Drive, 1.5 kW, 3-pha

MPNATV350U15N4FS
Active

Schneider Electric Altivar Machine ATV350, ATV350U15N4FS, 1.5 kW, 3-phase 400-480 V, 6.3 A output, STO safety function, integrated C2 EMC filter.

Schneider Electric ATV350U15N4FS datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV350U15N4FS — Identification
ParameterValue
Product typeVariable speed drive
Device short nameATV350
Product range / familyAltivar Machine ATV350
ATV350U15N4FS — Power & Output
ParameterValue
Motor power (kW)1.5 kW conveying applications
Continuous output current6.3 A 2...16 kHz conveying applications
Max. transient current12.6 A 3 s conveying applications) 9.4 A 60 s conveying applications)
Apparent power2.5 kVA 400...480 V conveying applications)
ATV350U15N4FS — Input / Supply
ParameterValue
Rated supply voltage range400...480 V +/-5 %
Input line current6.3 A 400...480 V conveying applications)
Internal/auxiliary suppliesInternal supply for logic inputs 24 V DC
ATV350U15N4FS — Control & Performance
ParameterValue
Asynchronous motor control modesU/F vector control Sensorless vector control (SVC) Energy saving control Closed-loop control with encoder
Synchronous motor control modesPermanent magnet control in open loop Permanent magnet control in close loop
ATV350U15N4FS — Protection & EMC
ParameterValue
Integrated EMC filter classClass C2 EMC filter integrated EN 61508 32.8 ft (10 m) Class C2 EMC filter integrated EN 61800-5-1 32.8 ft (10 m) Class C2 EMC filter integrated EN 61800-5-2 32.8 ft (10 m) Class C2 EMC filter integrated IEC 60529 32.8 ft (10 m) Class C2 EMC filter integrated UL 50E 32.8 ft (10 m) Class C2 EMC filter integrated machinery directive 2006/42/EC 32.8 ft (10 m)
Protection functionsLine supply phase loss drive Motor phase loss motor Line supply overvoltage and undervoltage drive Overheating protection drive Overload motor With PTC probes motor Short-circuit between motor phases drive Overcurrent between output phases and earth drive
ATV350U15N4FS — Mechanical & Cooling
ParameterValue
IP degree of protectionIP54 conforming to EN 61508 IP54 conforming to EN 61800-5-1 IP54 conforming to EN 61800-5-2 IP54 conforming to IEC 60529 IP54 conforming to UL 50E IP54 conforming to machinery directive 2006/42/EC
Cooling methodAN (air natural)
ATV350U15N4FS — Environmental
ParameterValue
Operating ambient temperature-22...140 °F (-30...60 °C) (with current derating of 2.5 % per °C above 40 °C)
Operating altitude3280.84 ft (1000 m) with current derating of 0.5 % per additional 100 m
Relative humidity5...95 % without condensation EN/IEC 60068-2-3
Storage / transport temperature-22...140 °F (-30...60 °C)
Pollution degree2
Vibration resistance1 mm (f= 5...13 Hz) conforming to DNVGL-GC-0339 0.7 gn (f= 13...100 Hz) conforming to DNVGL-GC-0339
ATV350U15N4FS — Approvals
ParameterValue
Certifications & markingCE UL CULus IEC UKCA
Standards complianceIEC 61800-5-1 IEC 61800-3 UL 508C IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 2 category C3 IEC 60721-3 IEC 61508 IEC 13849-1
ATV350U15N4FS — Communication
ParameterValue
Communication protocolsEtherNet/IP EtherCAT IO-Link Modbus TCP PROFINET

Product details

The Schneider Electric ATV350U15N4FS is an Altivar Machine ATV350 drive sized for a 1.5 kW asynchronous or synchronous motor on a 3-phase 400-480 V supply. It delivers 6.3 A output current over a 1-599 Hz frequency range, with a 2-16 kHz switching frequency that derates 0.5 % per additional 100 m above 1000 m altitude. The integrated Class C2 EMC filter covers 10 m cable runs, meeting IEC 61800-3 environments 1 category C2 and 2 category C3. STO (Safe Torque Off) is built in per IEC 61508 and IEC 13849-1.

Wall-mounted unit, dimensions 20.6 in wide x 12.2 in high x 9.2 in deep (522 x 310 x 233 mm). Natural air cooling (AN) — no fan to maintain. The M12 I/O connector base handles EtherCAT, EtherNet/IP, Modbus TCP, and PROFINET via two 100BASE-FX Ethernet ports. Internal 24 V DC supply for logic inputs; discrete inputs are 12 V DC compatible. An incremental encoder input (24 V) is provided for closed-loop feedback on synchronous motors.

Protection and compliance

Protection covers line supply phase loss, motor phase loss, overvoltage/undervoltage, overheating, motor overload (with PTC probes), short-circuit between motor phases, and ground faults. Marked CE, UL, CULus, IEC, UKCA. Pollution degree 2, operating altitude 1000 m with derating, humidity 5-95 % non-condensing. The 3-phase input derates 2.5 % per °C above rated ambient.

Frequently asked questions

What motor types does the ATV350U15N4FS support?

It is designed for both asynchronous (induction) and synchronous motors, rated for 1.5 kW output.

What safety functions are included?

Safe Torque Off (STO) is integrated, compliant with IEC 61508 and IEC 13849-1.

What compliance standards does it meet?

It carries CE, UL, CULus, IEC, and UKCA markings, and complies with IEC 61800-5-1, IEC 61800-3, UL 508C, IEC 60721-3, IEC 61508, and IEC 13849-1.

MPN
ATV350U15N4FS