Skip to main content
Log in
Schneider Electric ATV6000 — AC Drive (VFD) 480V

Schneider ATV6000 Altivar Process Drive, Multilevel IGBT, <3

MPNATV6000
Active

Schneider Electric Altivar Process ATV6000, medium-voltage drive, multilevel IGBT inverter, <3% THDI, IP31, floor-standing enclosure.

Schneider Electric ATV6000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV6000 — Identification
ParameterValue
Product typeMedium voltage variable speed drive
Device short nameATV6000
Product range / familyAltivar Process ATV6000
ATV6000 — Input / Supply
ParameterValue
Network number of phases3 phases
Internal/auxiliary suppliesInternal supply for digital inputs and PoE 24 V DC 21...27 V, Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, External supply for digital inputs 24 V DC 19...30 V External supply for control circuit 100...240 V AC 47...63 Hz External supply for control circuit 120...370 V DC +/- 10 % 1 kVA Auxiliary power supply 230 V AC +/- 10 % External supply for cooling fan 400 V AC +/- 10 %
ATV6000 — Control & Performance
ParameterValue
Output frequency range0.1...120 Hz
Asynchronous motor control modesClosed loop vector control U/F vector control Energy saving control Vector control with slip compensation in open loop
Synchronous motor control modesPermanent magnet control in open loop Permanent magnet control in close loop Line start permanent magnet motor
ATV6000 — Protection & EMC
ParameterValue
Integrated EMC filter classIntegrated conforming to IEC 61800-3 category C3 control Integrated conforming to IEC 61800-3 category C4 power
Protection functionsLine supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overvoltages on the DC bus: drive Thermal overload for transformer: drive Cabinet overheating: drive Overcurrent: drive Overload: drive Short-circuit protection: drive IGBT for each cell: drive Thermal protection: motor Motor phase break: motor Motor earth fault: motor Break on the control circuit: drive Fan monitoring: drive
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Prospective short-circuit current (Isc)31.5 kA for 150 ms
ATV6000 — Mechanical & Cooling
ParameterValue
IP degree of protectionIP31 conforming to IEC 60529
Cooling methodForced convection
Assembly / installation styleIn floor-standing enclosure
ATV6000 — Environmental
ParameterValue
Operating ambient temperature0...40 °C 40...50 °C with derating factor -25...70 °C during transport
Operating altitude1000...2000 m with derating factor
Relative humidity5...95 % without condensation conforming to IEC 60068-2-3
Storage / transport temperature0...50 °C
Pollution degree2 conforming to IEC 61800-5-1
ATV6000 — Approvals
ParameterValue
Certifications & markingCE EAC
Standards complianceIEC 61800-3 EN/IEC 61800-4 IEC 61800-5-1 IEC 60529 IEEE 519:1992 EN/IEC 60076
ATV6000 — Communication
ParameterValue
Communication protocolsEthernet IP/Modbus TCP

Product details

The Schneider Electric ATV6000 is a medium-voltage Altivar Process drive using multilevel IGBT inverter cells with PWM output, sized for synchronous, permanent magnet, and asynchronous motors. It integrates an EMC filter compliant with IEC 61800-3 category C3 on the control side and C4 on the power side, and delivers total harmonic current distortion under 3% per IEEE 519-1992.

Supply architecture and control wiring

The drive requires multiple supply rails. The control circuit accepts either 100...240 V AC 47...63 Hz or 120...370 V DC. Digital inputs and PoE run on an internal 24 V DC supply (21...27 V), with an external 24 V DC option (19...30 V). A separate 10.5 V DC supply powers the reference potentiometer (1 to 10 kOhm). The auxiliary power supply is 230 V AC, and the cooling fan requires 400 V AC. The phase-shifting transformer and power cells are included in the enclosure.

Protection and environmental ratings

Protection covers line supply overvoltage, undervoltage, and phase loss; DC bus overvoltage; transformer thermal overload; cabinet overheating; overcurrent and short-circuit on the IGBT cells; motor thermal protection, phase break, and earth fault; control circuit break; and fan monitoring. The enclosure is rated IP31 per IEC 60529, with forced convection cooling. Pollution degree 2 per IEC 61800-5-1. Operating altitude is 1000...2000 m with derating. Relative humidity range is 5...95% without condensation. The enclosure is light grey (RAL 7035) and cable entry is at the bottom.

Frequently asked questions

What are the key supply voltage requirements for the ATV6000?

The control circuit accepts 100...240 V AC 47...63 Hz or 120...370 V DC. Digital inputs and PoE use an internal 24 V DC supply (21...27 V) or external 24 V DC (19...30 V). Auxiliary power is 230 V AC, and the cooling fan requires 400 V AC.

What certifications and standards does the ATV6000 comply with?

The drive carries CE and EAC markings and complies with IEC 61800-3, EN/IEC 61800-4, IEC 61800-5-1, IEC 60529, IEEE 519:1992, and EN/IEC 60076.

What is the enclosure protection rating of the ATV6000?

The enclosure is rated IP31 per IEC 60529.

MPN
ATV6000