BOM / RFQ

Schneider Electric ATV6000C625A1010NA3 — AC Drive (VFD) 480V

Schneider ATV6000C625A1010NA3 Altivar Process drive, 6250 kV

MPNATV6000C625A1010NA3

Active

Schneider Electric, Altivar Process ATV6000 series, ATV6000C625A1010NA3, 6250 kVA apparent power, 5000 kW normal duty motor power, 48-pulse diode rectifier, floor-standing enclosure.

Add to RFQ

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ATV6000C625A1010NA3 — Identification
Parameter	Value
Product type	Medium voltage variable speed drive
Device short name	ATV6000
Product range / family	Altivar Process ATV6000

ATV6000C625A1010NA3 — Power & Output
Parameter	Value
Motor power (kW)	5000 kW for normal duty 4740 kW for heavy duty
Continuous output current	328 A heavy duty 345 A normal duty
Max. transient current	615 A during 3 s (heavy duty) 518 A during 3 s (normal duty)
Apparent power	6250 kVA

ATV6000C625A1010NA3 — Input / Supply
Parameter	Value
Rated supply voltage range	10 kV +/- 10 %
Input line current	340 A heavy duty 361 A normal duty
Network number of phases	3 phases
Internal/auxiliary supplies	Internal supply for digital inputs and PoE 24 V DC 21...27 V, Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, External supply for digital inputs 24 V DC 19...30 V External supply for control circuit 100...240 V AC 47...63 Hz External supply for control circuit 120...370 V DC +/- 10 % 1 kVA Auxiliary power supply 230 V AC +/- 10 % External supply for cooling fan 400 V AC +/- 10 % 20 kVA

ATV6000C625A1010NA3 — Control & Performance
Parameter	Value
Output frequency range	0.1...120 Hz
Asynchronous motor control modes	Closed loop vector control U/F vector control Energy saving control Vector control with slip compensation in open loop
Synchronous motor control modes	Permanent magnet control in open loop Permanent magnet control in close loop Line start permanent magnet motor

ATV6000C625A1010NA3 — Protection & EMC
Parameter	Value
Integrated EMC filter class	Integrated conforming to IEC 61800-3 category C3 control Integrated conforming to IEC 61800-3 category C4 power
Protection functions	Line supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overvoltages on the DC bus: drive Thermal overload for transformer: drive Cabinet overheating: drive Overcurrent: drive Overload: drive Short-circuit protection: drive IGBT for each cell: drive Thermal protection: motor Motor phase break: motor Motor earth fault: motor Break on the control circuit: drive Fan monitoring: drive
EMC immunity tests	Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Prospective short-circuit current (Isc)	31.5 kA for 150 ms

ATV6000C625A1010NA3 — Mechanical & Cooling
Parameter	Value
IP degree of protection	IP31 conforming to IEC 60529
Acoustic noise level	83 dB
Cooling method	Forced convection
Assembly / installation style	In floor-standing enclosure

ATV6000C625A1010NA3 — Environmental
Parameter	Value
Operating ambient temperature	0...40 °C 40...50 °C with derating factor -25...70 °C during transport
Operating altitude	1000...2000 m with derating factor
Relative humidity	5...95 % without condensation conforming to IEC 60068-2-3
Storage / transport temperature	0...50 °C
Pollution degree	2 conforming to IEC 61800-5-1

ATV6000C625A1010NA3 — Approvals
Parameter	Value
Certifications & marking	CE EAC
Standards compliance	IEC 61800-3 EN/IEC 61800-4 IEC 61800-5-1 IEC 60529 IEEE 519:1992 EN/IEC 60076

ATV6000C625A1010NA3 — Communication
Parameter	Value
Communication protocols	Ethernet IP/Modbus TCP

Product details

The Schneider Electric ATV6000C625A1010NA3 is an Altivar Process ATV6000 medium-voltage drive in a floor-standing enclosure. It delivers 6250 kVA apparent power, rated for 5000 kW normal duty and 4740 kW heavy duty motor loads, with a 48-pulse diode rectifier front end that keeps input THDI under 3% per IEEE 519-1992.

The 48-pulse rectifier eliminates the need for external harmonic filters on most grids — the THDI stays under 3% at the drive input. Line current is 340 A heavy duty, 361 A normal duty; plan supply cabling and transformer sizing accordingly. Power losses run 179.4 kW heavy duty, 189.3 kW normal duty — that heat must be handled by the room's ventilation or HVAC, not the drive's forced-convection fans alone. The 10-inch LCD touch screen is the primary HMI; the control block carries two RJ45 for Ethernet IP/Modbus TCP, one RJ45 for Modbus serial, and slot A accepts Profibus DP, PROFINET, DeviceNet, CANopen, or EtherCAT communication modules. Slot B takes encoder interfaces (digital 5/12 V, analog, resolver, HTL). Both slots also accept digital/analog I/O extension and output relay modules.

Frequently asked questions

What are the key electrical ratings of this drive?

Apparent power is 6250 kVA. Motor power is 5000 kW for normal duty and 4740 kW for heavy duty. Line current is 340 A heavy duty and 361 A normal duty. Input THDI is below 3% conforming to IEEE 519-1992.

What fieldbus options are available?

Slot A accepts Profibus DP V1, PROFINET, DeviceNet, CANopen (RJ45, SUB-D 9, or screw terminals), or EtherCAT modules. The control block has two RJ45 for Ethernet IP/Modbus TCP and one RJ45 for Modbus serial.