Skip to main content
Log in
Schneider Electric ATV6000D500A1111NA3 — AC Drive (VFD) 480V

Schneider ATV6000D500A1111NA3 AC Drive, 400 kW, 500 kVA

MPNATV6000D500A1111NA3
Active

Schneider Electric Altivar Process ATV6000, ATV6000D500A1111NA3, AC Drive (VFD) 480V, 400 kW normal duty / 380 kW heavy duty, 500 kVA apparent power, floor-standing enclosure, 54-pulse diode rectifier.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV6000D500A1111NA3 — Identification
ParameterValue
Product typeMedium voltage variable speed drive
Device short nameATV6000
Product range / familyAltivar Process ATV6000
ATV6000D500A1111NA3 — Power & Output
ParameterValue
Motor power (kW)400 kW for normal duty 380 kW for heavy duty
Continuous output current25.1 A normal duty 24 A heavy duty
Max. transient current37.6 A during 3 s (normal duty) 45 A during 3 s (heavy duty)
Apparent power500 kVA
ATV6000D500A1111NA3 — Input / Supply
ParameterValue
Rated supply voltage range11 kV +/- 10 %
Input line current26.3 A normal duty 25 A heavy duty
Network number of phases3 phases
Internal/auxiliary suppliesInternal supply for digital inputs and PoE 24 V DC 21...27 V, Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, External supply for digital inputs 24 V DC 19...30 V External supply for control circuit 100...240 V AC 47...63 Hz External supply for control circuit 120...370 V DC +/- 10 % 1 kVA Auxiliary power supply 230 V AC +/- 10 % External supply for cooling fan 400 V AC +/- 10 % 6 kVA
ATV6000D500A1111NA3 — Control & Performance
ParameterValue
Output frequency range0.1...120 Hz
Asynchronous motor control modesClosed loop vector control U/F vector control Energy saving control Vector control with slip compensation in open loop
Synchronous motor control modesPermanent magnet control in open loop Permanent magnet control in close loop Line start permanent magnet motor
ATV6000D500A1111NA3 — Protection & EMC
ParameterValue
Integrated EMC filter classIntegrated conforming to IEC 61800-3 category C3 control Integrated conforming to IEC 61800-3 category C4 power
Protection functionsLine supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overvoltages on the DC bus: drive Thermal overload for transformer: drive Cabinet overheating: drive Overcurrent: drive Overload: drive Short-circuit protection: drive IGBT for each cell: drive Thermal protection: motor Motor phase break: motor Motor earth fault: motor Break on the control circuit: drive Fan monitoring: drive
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Prospective short-circuit current (Isc)31.5 kA for 150 ms
ATV6000D500A1111NA3 — Mechanical & Cooling
ParameterValue
IP degree of protectionIP31 conforming to IEC 60529
Acoustic noise level80 dB
Cooling methodForced convection
Assembly / installation styleIn floor-standing enclosure
ATV6000D500A1111NA3 — Environmental
ParameterValue
Operating ambient temperature0...40 °C 40...50 °C with derating factor -25...70 °C during transport
Operating altitude1000...2000 m with derating factor
Relative humidity5...95 % without condensation conforming to IEC 60068-2-3
Storage / transport temperature0...50 °C
Pollution degree2 conforming to IEC 61800-5-1
ATV6000D500A1111NA3 — Approvals
ParameterValue
Certifications & markingEAC CE
Standards complianceIEC 61800-3 EN/IEC 61800-4 IEC 61800-5-1 IEC 60529 IEEE 519:1992 EN/IEC 60076
ATV6000D500A1111NA3 — Communication
ParameterValue
Communication protocolsEthernet IP/Modbus TCP

Product details

400 kW drive in a floor-standing enclosure

The ATV6000D500A1111NA3 is a Schneider Electric Altivar Process ATV6000 AC drive rated for 400 kW normal duty and 380 kW heavy duty motor power, with an apparent power rating of 500 kVA. It ships as a complete floor-standing enclosure assembly — 2751 mm high, 3860 mm wide, 1600 mm deep — integrating the phase-shifting transformer, power cells, cooling fans, and HMI.

Line-side harmonics and input topology

A 54-pulse diode rectifier bridge feeds the DC bus, keeping total harmonic current distortion below 3 % per IEEE 519:1992 without an external filter. The power factor sits at 0.96, and the integrated EMC filter meets IEC 61800-3 category C3 on the control side and C4 on the power side.

Motor types and output stage

The output uses IGBT inverter cells in a multilevel PWM topology, suitable for asynchronous, synchronous, and permanent magnet motors. Output voltage matches the supply voltage; the drive includes motor thermal protection, phase-loss detection, and earth-fault monitoring.

Control interfaces and expandability

The control block carries two RJ45 ports for Ethernet IP / Modbus TCP and one RJ45 for Modbus serial. Slot A accepts fieldbus option cards for Profibus DP V1, PROFINET, DeviceNet, CANopen, or EtherCAT. Slot B supports encoder feedback modules (digital 5/12 V, analog, resolver, or HTL). Digital and analog I/O or relay extension modules fit either slot. The 10-inch LCD touch screen provides multi-language local control and monitoring.

Regulatory compliance and lifecycle

Marked EAC and CE, designed to IEC 61800-3, IEC 61800-4, IEC 61800-5-1, and IEC 60529. Pollution degree 2 per IEC 61800-5-1.

Frequently asked questions

What compliance documentation does Schneider Electric provide for ATV6000D500A1111NA3?

The drive carries EAC and CE markings and is designed to IEC 61800-3, IEC 61800-4, IEC 61800-5-1, and IEC 60529. The declaration of conformity covers the full assembly.

MPN
ATV6000D500A1111NA3