Skip to main content
Log in
Schneider Electric ATV630C25N4F — AC Drive (VFD) 480V

Schneider ATV630C25N4F AC Drive 250 kW, 477 A, IP21

MPNATV630C25N4F
Active

Schneider Electric Altivar Process ATV630, ATV630C25N4F, variable speed drive, 380-440 V, 250 kW normal duty / 200 kW heavy duty, 477 A continuous output, IP21 floor-standing, standard version.

$27,546.48Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV630C25N4F — Identification
ParameterValue
Product typeVariable speed drive
Device short nameATV630
Product range / familyAltivar Process ATV600
ATV630C25N4F — Power & Output
ParameterValue
Motor power (kW)250 kW (normal duty) 200 kW (heavy duty)
Continuous output current477 A at 2.5 kHz for normal duty 370 A at 2.5 kHz for heavy duty
ATV630C25N4F — Input / Supply
ParameterValue
Rated supply voltage range380...440 V
Input line current391 A at 400 V (normal duty) 319 A at 400 V (heavy duty) 453 A at 380 V (normal duty) 369 A at 380 V (heavy duty)
ATV630C25N4F — Control & Performance
ParameterValue
Output frequency range0.1...500 Hz
ATV630C25N4F — Protection & EMC
ParameterValue
Integrated EMC filter classIntegrated with 150 m conforming to IEC 61800-3 category C3
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
ATV630C25N4F — Mechanical & Cooling
ParameterValue
IP degree of protectionIP21 conforming to IEC 61800-5-1 IP21 conforming to IEC 60529
Acoustic noise level70 dB
Cooling methodForced convection
ATV630C25N4F — Environmental
ParameterValue
Operating ambient temperature-15...40 °C (without derating) 40...50 °C (with derating factor)
Operating altitude1000...4800 m with current derating 1 % per 100 m
Relative humidity5...95 % without condensation conforming to IEC 60068-2-3
Storage / transport temperature-40...70 °C
Pollution degree2
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
ATV630C25N4F — Approvals
ParameterValue
Certifications & markingCE
Standards complianceIEC 60204-1 IEC 61800-2 IEC 61800-3 IEC 61800-5-1
ATV630C25N4F — Communication
ParameterValue
Communication protocolsEthernet Modbus serial Modbus TCP

Product details

250 kW process drive with STO SIL 3

The ATV630C25N4F is a 250 kW normal-duty / 200 kW heavy-duty variable speed drive from Schneider Electric's Altivar Process ATV600 series, designed for asynchronous and synchronous motors in process and utility applications. Continuous output current is 477 A at 2.5 kHz switching for normal duty, 370 A at 2.5 kHz for heavy duty, from a 380-440 V supply. The built-in safe torque off (STO) function meets SIL 3 — essential for safety circuits where the drive must reliably block rotation during maintenance or fault conditions.

Physical fit and cooling

Floor-standing enclosure rated IP21 per IEC 61800-5-1 and IEC 60529, cooled by forced convection moving 1300 m³/h of air. Noise level is 70 dB — factor this into the equipment room layout if operators work nearby. Operating altitude range is 1000-4800 m with a 1% current derating per 100 m above 1000 m. Ambient temperature range is -15 to 40 °C without derating, 40-50 °C with derating applied. The drive must be mounted vertically ±10°.

EMC and harmonic compliance for installation planning

Integrated EMC filter compliant with IEC 61800-3 category C3 for 150 m cable runs — suitable for industrial environments where the drive is installed in a separate enclosure from the supply transformer. Total harmonic current distortion (THDI) is below 48% at full load per IEC 61000-3-12. Immunity meets electrostatic discharge level 3, radiated field level 3, fast transient level 4, surge level 3, and conducted RF level 3 per IEC 61000-4-2 through -6.

Fieldbus and I/O configuration

Slot A accepts communication modules for Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, CANopen (daisy chain RJ45, SUB-D 9, or screw terminals), Ethernet IP/Modbus TCP/MD-Link, BACnet MS/TP, or Ethernet Powerlink. The drive also carries Ethernet, Modbus serial, and Modbus TCP as native ports. Eight discrete inputs are standard, with DI7 and DI8 programmable as pulse inputs up to 30 kHz at 24 V DC. An adjustable PID regulator is built in for closed-loop process control without an external controller.

Frequently asked questions

What compliance documentation does Schneider provide for the ATV630C25N4F?

The drive carries CE marking and complies with IEC 60204-1, IEC 61800-2, IEC 61800-3, and IEC 61800-5-1. The integrated EMC filter meets IEC 61800-3 category C3. No RoHS, REACH, or UL documentation is listed in the available spec record.

MPN
ATV630C25N4F