Skip to main content
Log in
Schneider Electric ATV630D75N4Z — AC Drive (VFD) 480V

Schneider ATV630D75N4Z Altivar Process, 75 kW VSD

MPNATV630D75N4Z
Active

Schneider Electric Altivar Process ATV630D75N4Z variable speed drive, Standard version, 380-480 V, 75 kW normal duty, 145 A output, STO SIL3, IP20.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV630D75N4Z — Identification
ParameterValue
Product typeVariable speed drive
Device short nameATV630
Product range / familyAltivar Process ATV600
ATV630D75N4Z — Power & Output
ParameterValue
Motor power (kW)75 kW normal duty) 55 kW heavy duty)
Continuous output current145 A 2.5 kHz normal duty 106 A 2.5 kHz heavy duty
ATV630D75N4Z — Input / Supply
ParameterValue
Rated supply voltage range380...480 V
Input line current131.3 A 380 V normal duty) 112.7 A 480 V normal duty) 98.9 A 380 V heavy duty) 86.9 A 480 V heavy duty)
ATV630D75N4Z — Control & Performance
ParameterValue
Output frequency range0.1...500 Hz
ATV630D75N4Z — Protection & EMC
ParameterValue
Integrated EMC filter classIntegrated 164.04 ft (50 m) IEC 61800-3 category C3 With EMC plate option
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
ATV630D75N4Z — Mechanical & Cooling
ParameterValue
IP degree of protectionIP20IEC 61800-5-1 IP00 at bottom terminals)IEC 60529
Acoustic noise level62.4 dB
Cooling methodForced convection
Assembly / installation styleWith heat sink
ATV630D75N4Z — Environmental
ParameterValue
Operating ambient temperature5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)
Operating altitude1000...4800 m with current derating 1 % per 100 m
Relative humidity5...95 % without condensation IEC 60068-2-3
Storage / transport temperature-40...158 °F (-40...70 °C)
Pollution degree2
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
ATV630D75N4Z — Approvals
ParameterValue
Certifications & markingCE
Standards complianceUL 508C IEC 61800-3 IEC 61800-3 environment 1 category C2 EN/IEC 61800-3 environment 2 category C3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
ATV630D75N4Z — Communication
ParameterValue
Communication protocolsEthernet Modbus serial Modbus TCP

Product details

Schneider Electric ATV630D75N4Z is an Altivar Process variable speed drive rated for 75 kW on normal duty (55 kW heavy duty) from a 380-480 V supply, with a continuous output current of 145 A at 2.5 kHz. It carries an integrated EMC filter meeting IEC 61800-3 category C3 and includes Safe Torque Off (STO) certified to SIL 3 — a prerequisite for safety-instrumented function integration.

This drive is current production — no last-time-buy or phase-out notice applies. The supply channel is the normal Schneider Electric distribution; lead time is quoted against your BOM line.

Mounts vertically with heat sink forced-air cooling (295 m³/h airflow). IP20 protection at the power section; bottom terminals are IP00 — gland plate planning must account for that. Ambient operating range 0–50 °C with derating above 40 °C, altitude derating starting at 1000 m. The integrated EMC filter is rated for 50 m motor cable length at C3; adding an EMC plate extends that. Standard communication includes Ethernet, Modbus serial, and Modbus TCP; Profibus DP V1, PROFINET, DeviceNet, CANopen, and BACnet MS/TP are slot-A options. STO SIL 3 is standard and wired via the safety input terminals. Vibration resistance 1 g at 13–200 Hz; shock 15 g / 11 ms.

Compliance documentation includes UL 508C, EN/IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and ISO 13849-1 — covering safety, EMC, and environmental requirements for process and utilities applications. RoHS/REACH declarations are available on request through your sourcing contact.

Order the ATV630D75N4Z against your project BOM. This is a standard-catalog active item — quote it to receive current pricing and lead time for your region.

Frequently asked questions

Does this drive have a safety function?

Yes, Safe Torque Off (STO) certified to SIL 3 is integrated as standard. It meets IEC 61508 and ISO 13849-1.

What compliance standards does the drive meet?

It complies with UL 508C, IEC 61800-3 (environment 1 category C2 and environment 2 category C3), IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and ISO 13849-1. EMC filter is integral for category C3.

MPN
ATV630D75N4Z